Applied thermal engineering

• 

  Año 2005, Vol. 25, Número 8

  • Power optimization of an irreversible closed intercooled regenerated brayton cycle coupled to variable-temperature heat reservoirs

    Wenhua Wang, Fengrui Sun, Lingen Chen, Chih Wu

    págs. 1097-1113

    

  • A simple technique for refrigerant mass measurement

    Erik Björk

    págs. 1115-1125

    

  • Prediction of temperature front in a gas turbine combustion chamber

    G. González, J. Kubiak, G. Urquiza, F.Z. Sierra

    págs. 1127-1140

    

  • Thermoeconomic analysis applied in cold water production system using biogas combustion

    Iraídes Aparecida de Castro Villela, José Luz Silveira

    págs. 1141-1152

    

  • Experiment and analysis on performance of steam-driven jet injector for district-heating system

    Ji-ping Liu, Jun-jie Yan, Zhao Zhang, Shu-feng Shao

    págs. 1153-1167

    

  • Testing of the mixing refrigerants HFC152a/HFC125 in domestic refrigerator

    Tie-Chen Li, Ying Zhang, Zhi-Gang Liu, Mao-Gang He

    págs. 1169-1181

    

  • Air-cooling induced from spinning of spin-casting moulds

    G.D. Jordaan, Zhongjie Huan

    págs. 1183-1194

    

  • Control of thermally integrated incineration¿waste heat recovery systems, a case study

    S.A. El-Behairy, R.S. Ettouney, M.A. El-Rifai

    págs. 1195-1205

    

  • Thermal performance of automotive aluminium plate radiator

    Ali A. Bondok, A. Witry, M.H. Al-Hajeri

    págs. 1207-1218

    

  • Off-design simulation and mathematical modeling of small-scale CHP plants at part loads

    Ilkka Keppo, Tuula Savola

    págs. 1219-1232

    

  • Heat recovery from a micro-gas turbine by vapour jet refrigeration systems

    Paolo Iora, Costante Invernizzi

    págs. 1233-1246

    

  • An experimental study of heat transfer in an open-ended vertical eccentric annulus with insulated and constant heat flux boundaries

    R. Hosseini, M.R. Heyrani-Nobari, M. Hatam

    págs. 1247-1257

    

  • Feasibility study on the co-generation of ethylene and electricity through oxidative coupling of methane

    S. Spoelstra, F.W.A. Tillemans, J.A. Hugill, J.W. Dijkstra

    págs. 1259-1271

    

  • Thermodynamic simulation of dryer section heat recovery in paper machines

    L. Sivill, P. Ahtila, M. Taimisto

    págs. 1273-1292

    

  • Optimum thermal design of modular compact heat exchangers structure for heat recovery steam generators

    Alessandro Franco, Nicola Giannini

    págs. 1293-1313

    

  • An experimental study of the effect of octane number higher than engine requirement on the engine performance and emissions

    Ibrahim Kilicaslan, Necati Ozsezen, Mustafa Canakci, Cenk Sayin

    págs. 1315-1324

    

  • Influence of temperature inversions on wet-cooling tower performance

    D.G. Kröger, J.C. Kloppers

    págs. 1325-1336

    

  • Generating hot water by solar energy and application of neural network

    Hamit Cacur, Fethi Halici, Cuma Cetiner, Imdat Taymaz

    págs. 1337-1348

    

  • Effect of packing in the airflow passage on the performance of a solar air-heater with conical concentrator

    Dursun Pehlivan, ¿nci Türk Tog¿rul

    págs. 1349-1362

    

  • A modular approach to study the performance of a two-stage heat pump system for drying

    S.K. Chou, K.J. Chua

    págs. 1363-1379

    

  • Characteristics of flow and heat transfer for in-line plate segments inside channel used for photovoltaic modules thermal regulation

    Ahmed Hamza H. Ali

    págs. 1381-1401