Chemical engineering science

• 

  Año 2005, Número 16

  • Practical and direct expressions of the heat of vaporization for mixtures

    Ryo Akasaka, Takehiro Ito, Tomohiko Yamaguchi

    págs. 4369-4376

    

  • Conceptual design of single-feed hybrid reactive distillation columns

    Megan Jobson, Ramona M. Dragomir

    págs. 4377-4395

    

  • Separation of carbon dioxide and methane in continuous countercurrent gas centrifuges

    Ralph van Wissen, Michael Golombok, J.J.H. Brouwers

    págs. 4397-4407

    

  • An improved dynamic combined model for evaluating the mass transfer performances in extraction columns

    Wang Jiading, Luo Guangsheng, Tang Xiaojin

    págs. 4409-4421

    

  • Heat transfer phenomena in a solid oxide fuel cell: An analytical approach

    F.A. Coutelieris, P.E. Tsiakaras, S.L. Douvartzides

    págs. 4423-4430

    

  • A systematic approach to the synthesis and design of flexible site utility systems

    Antonis Kokossis, Zhigang Shang

    págs. 4431-4451

    

  • Numerical simulation of enhancement of mass transfer in the cathode electrode of a PEM fuel cell by magnet particles deposited in the cathode-side catalyst layer

    L.B. Wang, Tatsuhiro Okada, Nobuko I. Wakayama

    págs. 4453-4467

    

  • Three-dimensional modeling of a circulating fluidized bed gasifier for sewage sludge

    I. Petersen, J. Werther

    págs. 4469-4484

    

  • Three dimensional iron flow and heat transfer in the hearth of a blast furnace during tapping process

    C.N. Huang, S.W. Du, W.T. Cheng

    págs. 4485-4492

    

  • Stability analysis of bubble columns: Predictions for regime transition

    Manish R. Bhole, Jyeshtharaj B. Joshi

    págs. 4493-4507

    

  • Influence of operation parameters on the separation of mixtures by pervaporation and vapor permeation with inorganic membranes. Part 1: Dehydration of solvents

    Stefan Sommer, Thomas Melin

    págs. 4509-4523

    

  • Influence of operation parameters on the separation of mixtures by pervaporation and vapor permeation with inorganic membranes. Part 2: Purely organic systems

    Thomas Melin, Stefan Sommer

    págs. 4525-4533

    

  • Optimal design and steady-state operation of micro power generation employing fuel cells

    Benoît Chachuat, Paul I. Barton, Alexander Mitsos

    págs. 4535-4556

    

  • Nanomilling in stirred media mills

    Frank Stenger, Stefan Mende, Jörg Schwedes, Wolfgang Peukert

    págs. 4557-4565

    

  • The effects of particle and gas properties on the fluidization of Geldart A particles

    M.A. van der Hoef, J.A.M. Kuipers, M. Ye

    págs. 4567-4580

    

  • Self- and mutual diffusion coefficient equation for pure fluids, liquid mixtures and polymeric solutions

    Ronaldo Nobrega, Rodrigo A. Reis, Frederico W. Tavares, José V. Oliveira

    págs. 4581-4592

    

  • Macropore diffusion dusty-gas coefficient for pelletised zeolites from breakthrough experiments in the system

    Paul A. Webley, Richard S. Todd

    págs. 4593-4608

    

  • Modelling of a rotary kiln for the pyrolysis of aluminium waste

    A. Pichat, H. Roustan, F. Marias

    págs. 4609-4622

    

  • A new technique for the determination of contact time distribution (CTD) from tracers experiments in heterogeneous systems

    S. Othman, C. Jallut, M. Tayakout-Fayolle

    págs. 4623-4633

    

  • Dynamic simulation of pressure swing adsorption system with the electrical network

    Chunxia Long, Rong Zeng, Xijun Hu, Jianyu Guan

    págs. 4635-4645

    

  • A new device for coating single particles under controlled conditions

    Daniel Ström, Stina Karlsson, Staffan Folestad, Thomas Laurell, Anders Rasmuson, Johan Nilsson, Ingela Niklasson Björn

    págs. 4647-4653

    

  • Comments on the free rise of gas bubbles in non-Newtonian liquids

    K. Dewsbury, A. Margaritis, D. Karamanev

    págs. 4655-4657

    

  • A conceptually simple derivation of the Kelvin equation

    K.P. Galvin

    págs. 4659-4660