Metrologia: International journal of scientific metrology

• 

  Año 2005, Vol. 42, Número 6. Dedicado a: The 4th CCM International Conference on Pressure Metrology fromo Ultra-High Vacuum to Very High Pressures (10-9 Pa to 10+9 Pa)

  • Realization of the medium and high vacuum primary standard in CENAM, Mexico

    J. C. Torres-Guzmán, L. A. Santander, K. Jousten

    págs. 157-160

    

  • The IMGC/CENAM-HG6 mercury manobarometer

    J. C. Torres-Guzmán, P. Olvera-Arana, F. Alasia, M. Sardi, S. Zuñiga, L. A. Santander, A. Esparza

    págs. 161-164

    

  • Results on the effective area of the FPG-type digital piston manometer of MIKES

    Markku Rantanen, Sari Semenoja

    págs. 165-168

    

  • Establishment of an Australian high pressure standard

    J. K. L. Man

    págs. 169-172

    

  • The static expansion system as a new medium vacuum primary standard in KRISS

    S. S. Hong, Y. H. Shin, K. H. Chung, I. Arakawa

    págs. 173-175

    

  • Global model of the gas flow in high-vacuum standards

    P. Szwemin

    págs. 176-179

    

  • Comparison of the experimental data and the simulation results of backstreaming effect in the continuous gas expansion vacuum standard

    A. Calcatelli, M. Niewinski, P. Szwemin

    págs. 180-183

    

  • Generation and pressure measurment of extremely high vacuum (XHV) using a TiN coated chamber

    H. Akimichi, M. Hirata

    págs. 184-186

    

  • A low differential-pressure primary standard for the range 1 Pa to 13 kPa

    A. P. Miiller, C. R. Tilford, J. H. Hendricks

    págs. 187-192

    

  • New apparatus for calibrations in the range of 2 kPa absolute pressure

    S. Y. Woo, I. M. Choi

    págs. 193-196

    

  • Calculation of effective area A0 for six piston-cylinder assemblies of pressure balances: results of the EUROMET Project 740

    Gianfranco Molinar, M. Bergoglio, Wladimir Sabuga, P. Otal, G. Ayyildiz, J. Verbeek, P. Farar

    págs. 197-201

    

  • Calculation of the distortion coefficient and associated uncertainty of PTB and LNE 1 GPa pressure balances using finite element analysis: EUROMET Project 463

    Wladimir Sabuga, Gianfranco Molinar, Giorgio Buonanno, Trevor Esward, Thierry Rabault, Levent Yagmur

    págs. 202-206

    

  • Effectiveness of finite element calculation methods (FEM) on high performance pressure balances in liquid media up to 200 MPa

    Gianfranco Molinar, Giorgio Buonanno, G. Giovinco, P. Delajoud, R. Haines

    págs. 207-211

    

  • A method of analysis for cross-floats between pressure balances

    C. M. Sutton, M. P. Fitzgerald, W. Giardini

    págs. 212-215

    

  • Metrological characterization of a new standard, in absolute and gauge pressure modes, in the range 1 Pa to 15 000 Pa

    P. Otal, Jean Claude Legras

    págs. 216-219

    

  • A new instrument for the dimensional characterization of piston-cylinder units

    John R. Miles, Lorne E. Munro, R. Pekelsky

    págs. 220-223

    

  • New weight-handling device for commercial oil pressure balances

    S. Y. Woo, I. M. Choi, B. S. Kim

    págs. 224-226

    

  • Development of small differential pressure standard using double pressure balances

    M. Kojima, Tokihiko Kobata, K. Saitou, M. Hirata

    págs. 227-230

    

  • Accurate determination of equilibrium state between two pressure balances using a pressure transducer

    Tokihiko Kobata, Douglas A. Olson

    págs. 231-234

    

  • Characterization of quartz Bourdon-type high-pressure transducers

    Tokihiko Kobata

    págs. 235-238

    

  • Pressure balance elastic distortion: experiment versus theory

    M. P. Fitzgerald, C. M. Sutton

    págs. 239-241

    

  • Direct measurements of pressure-induced distortion in a piston-cylinder using a capacitance technique

    N. Moisoi, I. Severn, D. R. Sumner

    págs. 242-245

    

  • Calculation of the pressure distortion coefficient and uncertainty budget of the BNM/LNE 200 MPa national standard

    Thierry Rabault, Jean Claude Legras

    págs. 246-249

    

  • On the improvement of the metrological properties of manganin sensors

    Aleksander J. Rostocki, Michal K. Urbanski, Roland Wisniewski, Teresa Wilczynska

    págs. 250-252