Compel: International journal for computation and mathematics in electrical and electronic engineering

• 

  Año 2006, Vol. 25, Número 2

  • Numeric magnetic field calculation and field current calculation for synchronous generators

    S. Kunckel

    págs. 270-282

    

  • Application of circuit and field-circuit methods in designing process of small induction motors with stator cores made from amorphous iron

    M. Dems, K. Komeza

    págs. 283-296

    

  • Cost ? performance ? size optimization for automotive induction machines: A fast and accurate FEM, analytical model and optimization mixed procedure

    G. Pugsley, A. Fonseca, C. Chillet

    págs. 297-308

    

  • Automation of finite element aided design of induction motors using multi-slice 2D models

    D. R. Griffiths, J. K. Sykulski

    págs. 309-319

    

  • Accuracy analysis of the thrust force in 2D-3D finite element models

    F. Henrotte, G. ¿ge

    págs. 320-333

    

  • Extraction of circuit parameters from time stepping FEM computation for coupled field-circuit simulation

    A. Arkkio, S. Kanerva

    págs. 334-343

    

  • Eccentric air-gap element for transient finite-element machine simulation

    H. D. Gersem

    págs. 344-356

    

  • Coupled field, circuit and mechanical modelling of wind-turbine

    A. Haniotis

    págs. 357-367

    

  • A simplified approach to permanent magnet and reluctance motor characteristics determination by finite-element methods

    K. Reichert

    págs. 368-378

    

  • Simulation and experimentation of a single-phase claw-pole motor

    M. ³la, A. Reinap

    págs. 379-388

    

  • Stator optimization of six-phase claw-pole alternators using asymmetric winding arrangements

    C. Kaehler, S. Schulte, C. Schlensok, G. Henneberger

    págs. 389-398

    

  • Finite element modeling of a two-degree of freedom spherical actuator

    B. Dehez, G. Galary, D. Grenier

    págs. 399-411

    

  • Modelling and position control of voltage forced electromechanical actuator

    A. Patecki, S. Stepien

    págs. 412-426

    

  • Sliding-surface interface conditions for 3D machine models discretised by the finite integration technique

    H. D. Gersem, M. Ion

    págs. 427-439

    

  • 3D nonlinear transient finite element analysis of eddy currents in the stator clamping system of large hydro generators

    G. Traxler-Samek, E. Schmidt

    págs. 440-451

    

  • Inclusion of inter-bar currents in multi-slice FE modelling of induction motors ? influence of inter-bar resistance and skew discretisation

    J. Gyselinck

    págs. 452-464

    

  • Eddy current heating in large salient pole generators

    A. M. Michaelides, C. P. Riley

    págs. 465-474

    

  • Acoustic simulation of an induction machine with squirrel-cage rotor

    D. v. Riesen, C. Schlensok

    págs. 475-486

    

  • Iron loss analysis of linear oscillating actuator for linear compressor

    K. Park, H. Moon, S. Wang, H. Lee

    págs. 487-495

    

  • A comparison between axial and radial flux PM motor by optimum design method from the required output NT characteristics

    K. Akatsu, S. Wakui

    págs. 496-509

    

  • Electromagnetic modelling of permanent magnet axial flux motors and generators

    F. Marignetti

    págs. 510-522

    

  • Representation of permanent magnet brushless machine by means of orthogonal functions

    E. Napieralska-Juszczak, P. Witczak, B. Wawrzyniak

    págs. 523-535