International journal of advanced manufacturing technology

• 

  Año 2010, Vol. 47, Número 9-12

  • Preface for a MASMICRO special issue in the International Journal of Advanced Manufacturing Technology.

    H.H. Pedersen

    págs. 819-820

    

  • Micro-manufacturing: research, technology outcomes and development issues.

    Y. Qin, A. Brockett, Y. Ma, A. Razali, J. Zhao, C. Harrison, W. Pan, X. Dai, D. Loziak

    págs. 821-828

    

  • Finite-element and experimental analysis of dynamic behaviours of a micro-stamping tool system.

    M. Zhou, Y. Qin, C. Harrison, A. Brockett, Y. Ma

    págs. 839-844

    

  • An investigation of springback scatter in forming ultra-thin metal-sheet channel parts using crystal plasticity FE analysis.

    S. Wang, W. Zhuang, J. Cao, J. Lin

    págs. 845-852

    

  • Investigation into reduction of die-cavity deflection in micro-hydroforming processes using FEA.

    C. Hartl, G. Anyasodor, T. Ptaschlik, J. Lungershausen, S. Lippert

    págs. 853-858

    

  • Modelling of localised thinning features in the hydroforming of micro-tubes using the crystal-plasticity FE method.

    W. Zhuang, S. Wang, J. Cao, J. Lin, C. Hartl

    págs. 859-866

    

  • Design of a five-axis ultra-precision micro-milling machine�UltraMill. Part 1: holistic design approach, design considerations and specifications.

    D. Huo, K. Cheng, F. Wardle

    págs. 867-878

    

  • Design of a five-axis ultra-precision micro-milling machine�UltraMill. Part 2: integrated dynamic modelling, design optimisation and analysis.

    D. Huo, K. Cheng, F. Wardle

    págs. 879-890

    

  • Multi-scale simulation of the nano-metric cutting process.

    X. Sun, K. Cheng

    págs. 891-902

    

  • Servo piezo tool SPT400MML for the fast and precise machining of free forms.

    O. Sosnicki, A. Pages, C. Pacheco, T. Maillard

    págs. 903-910

    

  • Dynamic characteristics of a direct-drive air-bearing slide system with squeeze film damping.

    F.P. Wardle, C. Bond, C. Wilson, K. Cheng, D. Huo

    págs. 911-918

    

  • Influence of grain size on the wear behavior of CVD diamond coatings in micro-EDM.

    E. Uhlmann, S. Rosiwal, K. Bayerlein, M. Röhner

    págs. 919-922

    

  • Advances in hybrid laser joining.

    J. Holtkamp, A. Roesner, A. Gillner

    págs. 923-930

    

  • Temperature-dependent contact phenomena of PVD- and CVD-deposited DLC films sliding on the thin aluminium foil.

    M. J. Díaz de Cerio, G. Fuentes, R. Martínez, R.J. Rodríguez, E. Spain, J. Housden, Y. Qin, W. Hörnig

    págs. 931-936

    

  • An inter-machine material handling system for micro-manufacturing based on using a standard carrier.

    A.J. Sanchez-Salmeron, R. Lopez-Tarazon, R. Guzman-Diana, C. Ricolfe-Viala

    págs. 937-944

    

  • An automated inspection system for stents.

    I. Ibraheem, A. Binder

    págs. 945-952

    

  • Model-based techniques for the testing and diagnosis of micro-manufacturing devices and machines.

    P. Larizza, O. Petrone

    págs. 953-962

    

  • MASMICRO micro-/nano-materials processing, analysis, inspection and materials knowledge management.

    I.S. Chronakis, N.D. Mekras, K. Wiesauer, E. Breuer, D. Stifter, G.F. Fuentes, Y. Qin

    págs. 963-972

    

  • A knowledge-based design advisory system for collaborative design for micromanufacturing.

    X. Dai, Y. Qin, L. Ma, N. Juster

    págs. 973-980

    

  • Development of a VGRAIN system for CPFE analysis in micro-forming applications.

    J. Cao, W. Zhuang, S. Wang, J. Lin

    págs. 981-992

    

  • Application of genetic algorithm and Taguchi method in dynamic robust parameter design for unknown problems.

    P. Chatsirirungruang

    págs. 993-1002

    

  • Modeling and comparing of steady thermal state at gear milling by conventional and environment-friendly cooling method.

    D. Fratila, A. Radu

    págs. 1003-1012

    

  • Chatter prevention for milling process by acoustic signal feedback.

    N.-C. Tsai, D.-C. Chen, R.-M. Lee

    págs. 1013-1022

    

  • Forming characteristics analysis of the cross-section of axially inner grooved copper tube.

    Y. Li, Z. Xu, Y. Tang, Z. Zeng

    págs. 1023-1032

    

  • Modeling of induced empirical constitutive relations on materials with FCC, BCC, and HCP crystalline structures: severe plastic deformation.

    M. Kazeminezhad, E. Hosseini

    págs. 1033-1040

    

  • Optimization of roll forming process parameters�a semi-empirical approach.

    J. Paralikas, K. Salonitis, G. Ghryssolouris

    págs. 1041-1052

    

  • Study on the rotary cup dressing of CBN grinding wheel and the grinding performance

    A. Azizi, S.M. Rezaei, A. Rahimi

    págs. 1053-1064

    

  • Subsurface crystal lattice deformation machined by ultraprecision grinding of soft-brittle CdZnTe crystals.

    Z. Zhang, D. Guo, R. Kang, H. Gao, Z. Jin, Y. Meng

    págs. 1065-1082

    

  • Effect of process parameters on clad bead geometry and its shape relationships of stainless steel claddings deposited by GMAW.

    T. Kannan, J. Yoganandh

    págs. 1083-1096

    

  • Part-based model for visual detection and localization of gas tungsten arc weld pool.

    F. Shi, X. Huang, Y. Duan, S. Chen

    págs. 1097-1104