Waste management

• 

  Año 2010, Número 8-9

  • Guest editorial

    • Wasting time on solid waste in developing countries

      Azhar Ali

      págs. 1437-1438

      

  • MSW Characterisation

    • Characterisation of the physico-mechanical parameters of MSW

      Guillaume Stoltz, Jean-Pierre Gourc, L. Oxarango

      págs. 1439-1449

      

  • Separate collection

    • Heavy metal content in rubbish bags used for separate collection of biowaste

      Oscar Huerta-Pujol, Montserrat Soliva Torrentó, Francesc Giró, Marga López

      págs. 1450-1456

      

    • Implementing separate waste collection and mechanical biological waste treatment in South Africa: A comparison with Austria and England

      Cristina Trois, Oscar T. Simelane

      págs. 1457-1463

      

  • Composting

    • Compost mixture influence of interactive physical parameters on microbial kinetics and substrate fractionation

      Ardavan Mohajer, Anne Trémier, Suzelle Barrington, Cecile Teglia

      págs. 1464-1471

      

    • Changes in enzymatic activities and microbial properties in vermicompost of water hyacinth as affected by pre-composting and fungal inoculation: A comparative study of ergosterol and chitin for estimating fungal biomass

      P. Pramanik

      págs. 1472-1476

      

  • Food waste

    • Mass and element balance in food waste composting facilities

      HuiJun Zhang, T. Matsuto

      págs. 1477-1485

      

    • Assessment of the state of food waste treatment in the United States and Canada

      J. W. Levis, Morton A. Barlaz, Nickolas J. Themelis, P. Ulloa

      págs. 1486-1494

      

    • Food waste composting: Its use as a peat replacement

      M. Farrell, D.L. Jones

      págs. 1495-1501

      

    • Methane production from food waste leachate in laboratory-scale simulated landfill

      Shishir Kumar Behera, Jun Mo Park, Kyeong Kim, Hung-Suck Park

      págs. 1502-1508

      

  • Combustion residues

    • Understanding the chemical and mineralogical properties of the inorganic portion of MSWI bottom ash

      A. P. Bayuseno, Wolfgang W. Schmahl

      págs. 1509-1520

      

    • Hydrothermal solidification of municipal solid waste incineration bottom ash with slag addition

      Zhenzi Jing, Xianqiang Ran, Fangming Jin, Emile H. Ishda

      págs. 1521-1527

      

    • Reuse potential of low-calcium bottom ash as aggregate through pelletization

      G. Geetha, K. Ramamurthy

      págs. 1528-1535

      

    • A lysimeter experimental study and numerical characterisation of the leaching of incinerator bottom ash waste

      Abdelkader T. Ahmed, Hussain A. Khalid, Ashraf A. Ahmed, Daoyi Chen

      págs. 1536-1543

      

  • Landfilling: waste mechanics

    • Large-scale direct shear testing of municipal solid waste

      Dimitrios Zekkos, George A. Athanasopoulos, Jonathan D. Bray, Athena Grizi, Andreas Theodoratos

      págs. 1544-1555

      

    • Decoupling MSW settlement into mechanical and biochemical processes � Modelling and validation on large-scale setups

      Jean-Pierre Gourc, M.J. Staub, M. Conte

      págs. 1556-1568

      

  • Environmental impact of landfilling

    • Impact of MSW landfill on the environmental contamination of phthalate esters

      Hiu Liu, Ying Liang, Dan Zhang, Chen Wang, Hecheng Liang, Hesheng Cai

      págs. 1569-1576

      

    • A steady-state approach for evaluating the impact of solute transport through composite liners on groundwater quality

      Gary J. Foose

      págs. 1577-1586

      

    • Phytotoxicity of landfill leachate on willow � Salix amygdalina L.

      Andrzej Bialowiec, Peter F. Randerson

      págs. 1587-1593

      

    • Batch and column tests of metal mobilization in soil impacted by landfill leachate

      L. Di Palma, R. Mecozzi

      págs. 1594-1599

      

    • Factors influencing spontaneous combustion of solid waste

      Shadi Moqbel, Debra R. Reinhart, Ruey-Hung Chen

      págs. 1600-1607

      

    • Waste management health risk assessment: A case study of a solid waste landfill in South Italy

      E. Davoli, E. Fatture, V. Paiano, A. Colombo, M. Palmiotto, A.N. Rossi, M. II Grande, R. Fanelli

      págs. 1608-1613

      

  • Special waste: Sludge

    • Effect of thermochemical pretreatment on sewage sludge and its impact on carboxylic acids production

      Hema Rughoonundun, Cesar Granda, R. Mohee, Mark T. Holtzapple

      págs. 1614-1621

      

    • Sewage sludge ash to phosphorus fertiliser (II): Influences of ash and granulate type on heavy metal removal

      H. Mattenberger, G. Fraissler, M. Jöller, T. Brunner, Ingwald Obernberger, P. Herk, L. Hermann

      págs. 1622-1633

      

    • Production of technical grade phosphoric acid from incinerator sewage sludge ash (ISSA)

      Shane Donatello, D. Tong, Christopher R. Cheeseman

      págs. 1634-1642

      

  • Special waste: WEEE

    • A competing risks approach for time estimation of household WEEE disposal

      E. Gutiérrez, Belarmino Adenso Díaz Fernández, Sebastián Lozano Segura, Pilar Lourdes González Torre

      págs. 1643-1652

      

    • Toxicity potentials from waste cellular phones, and a waste management policy integrating consumer, corporate, and government responsibilities

      Seong-Rin Lim, Julie M. Schoenung

      págs. 1653-1660

      

  • Management of end-of-life vehicles

    • The development and prospects of the end-of-life vehicle recycling system in Taiwan

      Kuan-chung Chen, Shih-han Huang, I-wei Lian

      págs. 1661-1669

      

    • Thermal process of fluff: Preliminary tests on a full-scale treatment plant

      G. Mancini, G. Tamma, P. Viotti

      págs. 1670-1682

      

  • Health care waste management

    • Composition and production rate of medical waste from a small producer in Greece

      Anastasios Graikos, Evangelos Voudrias, Athanasios Papazachariou, N. Iosifidis, Maria Kapakidou

      págs. 1683-1689