Revista de la Construcción

• 

  Año 2022, Vol. 21, Número 3. Texto Completo Ejemplar

  • Effect of industrial wastes on self-cleaning properties of concrete containing anatase-TiO2

    Serdal Ünal, Mehmet Canbaz

    • Resumen
    • Texto completo

    págs. 493-505

    

  • Flexural behavior of concrete beams reinforced with glass fiber reinforced polymer and steel bars

    Cristian Espíndola Farias, Sarah Lodeti Pessi, Augusto Wanderlind, Jorge Henrique Piva, Elaine Guglielmi Pavei Antunes

    • Resumen
    • Texto completo

    págs. 506-522

    

  • Effect of silica fume and basalt fibers on the fracture parameters of magnesium phosphate cement incorporating fly ash

    Ahmet Onur Pehlivan

    • Resumen
    • Texto completo

    págs. 523-538

    

  • Gravel impact compaction piers as a method of soil improvement

    Bahman Niroumand, Hamed Niroumand

    • Resumen
    • Texto completo

    págs. 539-554

    

  • Experimental and numerical dynamic identification in an RC tower

    Fuat Aras, Tarık Tufan

    • Resumen
    • Texto completo

    págs. 555-569

    

  • Influence of hemp shiv, cement, and water content on the properties of lightweight hemp composites produced using different sizes of hemp shiv

    Murat Sahin

    • Resumen
    • Texto completo

    págs. 570-586

    

  • An experimental study on the blast responses of hollow core concrete slabs to contact explosions

    Sedat Savaş, Dursun Bakir

    • Resumen
    • Texto completo

    págs. 587-601

    

  • Safety monitoring analysis in a construction site using eye-tracking method

    Cemil Akcay

    • Resumen
    • Texto completo

    págs. 602-617

    

  • Comprehensive evaluation of transverse joint spacing in jointed plain concrete pavement

    Orhan Kaya

    • Resumen
    • Texto completo

    págs. 618-630

    

  • Response surface optimization of geopolymer mix parameters in terms of key engineering properties

    Şevin Ekmen, Kasim Mermerdas, Zeynep Alğın, Yusuf Işıker

    • Resumen
    • Texto completo

    págs. 631-644

    

  • Tool for the integration of building performance information within the BIM process

    Francielle Coelho dos Santos, Michele Tereza Marques Carvalho, Maria Carolina Gomes de Oliveira Brandstetter

    • Resumen
    • Texto completo

    págs. 645-656

    

  • Axial compressive behavior of short tie-columns with strapping spiral ties

    Milena Mesa Lavista, José Álvarez Pérez, Jorge Humberto Chávez Gómez, Gerardo Fajardo San Miguel, Diego Cavazos de Lira, Fabián René Ruvalcaba Ayala

    • Resumen
    • Texto completo

    págs. 657-668

    

  • Prediction of strength and shrinkage of ternary blended concrete with fly ash, slag and silica fume

    Thanga Sakthivel, K. Arulraj

    • Resumen
    • Texto completo

    págs. 669-677

    

  • Mechanical performance of ETC RC beam with U-framed AFRP laminates under a static load condition

    P. Loganathan, R. Mohanraj, S. Senthilkumar, K. Yuvaraj

    • Resumen
    • Texto completo

    págs. 678-691

    

  • Relative density influence on the liquefaction potential of sand with fines

    Mohamed Bensoula, Mohammed Bousmah, Hanifi Missoum

    • Resumen
    • Texto completo

    págs. 692-702

    

  • Effects of mix-design variables on the workability, rheology and stability of self-consolidating concrete

    Mohammad Musa Alami, Tahir Kemal Erdem

    • Resumen
    • Texto completo

    págs. 703-716

    

  • Ultimate capacity prediction of RC and SFRC beams with low shear span-depth ratio using NLFEA and inverse analysis

    Carlos Alberto Benedetty Torres, Ingrid Rocio Irreño Palomo, Juan de Jesus Martinez Pertuz, Luiz Carlos de Almeida, Leandro Mouta Trautwein, Pablo Augusto Krahl

    • Resumen
    • Texto completo

    págs. 717-736

    

  • A study on investigating the effect of lignosulfonate-based com-paction aid admixture dosage on the properties of roller com-pacted concrete

    Saadet Gokce Gok, Ismail Kilic

    • Resumen
    • Texto completo

    págs. 737-748

    

  • Soil-structure interaction analysis of Çelebiağa Mosque, Pertek-Türkiye

    Özgür Yıldız, Ebru Doğan

    • Resumen
    • Texto completo

    págs. 749-766

    

  • The effect of iron chip additive on structural behavior of under-reinforced and over-reinforced cantilever beams

    Omer Fatih Sancak, Muhammet Zeki Ozyurt

    • Resumen
    • Texto completo

    págs. 767-777