Mechanics based design of structures and machines

• 

  Año 2024, Vol. 52, Número 12

  • Enhanced design parameters of a cylindrical helical compression spring using an optimization algorithm and a non-linear behavior model

    Guillaume Cadet, Manuel Paredes

    • Resumen
    • Texto completo

    págs. 9609-9620

    

  • Assessing the effects of interference fit assembly on gear tooth surface deviations

    Alfonso Fuentes Aznar, Ignacio González Pérez

    • Resumen
    • Texto completo

    págs. 9621-9635

    

  • A parameters identification method and experimental analysis of contact friction interface in thermal environment

    Yunzhao Wang, Chaofeng Li, Tichang Jia, Shijie Pan

    • Resumen
    • Texto completo

    págs. 9636-9654

    

  • Consideration of surface roughness during the design of internal structures for fluid transport produced by additive manufacturing of PEEK

    Domen Šeruga, Martijn Wolbers, Jernej Klemenc, Marko Nagode, Simon Oman

    • Resumen
    • Texto completo

    págs. 9655-9668

    

  • A packing problem approach to grasping with a two-finger gripper with application in forest harvesting

    Yesid A. Caicedo, Luciano E. Chiang

    • Resumen
    • Texto completo

    págs. 9669-9690

    

  • Lifespan increase of electrical terminal crimping punches for the automotive industry

    R. D. S. G. Campilho, H. M. B. Lemos, F. J. G. Silva, R. P. Martinho, A. F. V. Pedroso

    • Resumen
    • Texto completo

    págs. 9691-9716

    

  • Productivity improvement of control cable manufacturing machine for the automotive industry

    P. M. S. Ramalho, R. D. S. G. Campilho, F. J. G. Silva, A. F. V. Pedroso, R. C. M. Sales Contini

    • Resumen
    • Texto completo

    págs. 9717-9740

    

  • Packaging machine vibration reduction by dynamic balancing

    Asensio Mikel, Félix Martínez, Mario Javier Cabello Ulloa, López Lombardero Mario, Aitor Cenitagoya, Manterola Julen, Marta Melendez

    • Resumen
    • Texto completo

    págs. 9741-9756

    

  • Distribution of the residual tolerable imbalance between correction plans

    Massimo Cavacece

    • Resumen
    • Texto completo

    págs. 9757-9774

    

  • Electric underwater tools for sun coral management

    Andrea Piga Carboni, Barbara Segal, Marcelo Crivellaro, Thais Gaino, Arthur Sena Marques, Hélio Valdevieso Catarin, Luiz Appel

    • Resumen
    • Texto completo

    págs. 9775-9786

    

  • Tracking of cogging stiffness using the multi-bin SDFT

    Foeke Vanbecelaere, Jasper De Viaene, Michael Monte, Kurt Stockman

    • Resumen
    • Texto completo

    págs. 9787-9808

    

  • A method to develop a high-fidelity gearbox thermal model based on limited temperature measurements

    Antonin Monot, Thomas Touret, Christophe Changenet, Fabrice Ville, Thierry Grandgeorge, Frederic Fayolle

    • Resumen
    • Texto completo

    págs. 9809-9829

    

  • Free vibration behavior in functionally graded material plates with dual efficient quadrilateral finite elements

    Debarupam Gogoi, Mihir Kumar Pandit, Arum Kumar

    • Resumen
    • Texto completo

    págs. 9830-9857

    

  • Study of dynamic performance and adaptive control of the variable stiffness actuator with time-varying parameters

    Zemin Yang, Xiaopeng Li, Dan Sun, Renzhen Chen, Wenfeng Xu

    • Resumen
    • Texto completo

    págs. 9858-9877

    

  • Free vibration analysis of tall buildings using a generalized continuous model: simplified approach to soil-structure interaction

    Mao Cristian Pinto Cruz

    • Resumen
    • Texto completo

    págs. 9878-9908

    

  • Fuzzy sliding mode control of automotive semi-active suspension based on optimization convergence law

    Wei Wang, Jinzhuang Xu, Jiqiang Zheng, Heng Zhao

    • Resumen
    • Texto completo

    págs. 9909-9922

    

  • Orthotropic failure criteria based on machine learning and micro-mechanical matrix adapting coefficient

    Nabi Mehri Khansari, Hamed Danandeh Hesar, Shahab Zare Hosseinabadi

    • Resumen
    • Texto completo

    págs. 9923-9946

    

  • Dynamic characteristics analysis of multi-link mechanism with clearances considering uncertain parameters

    Xiulong Chen, Erlei Yao

    • Resumen
    • Texto completo

    págs. 9947-9974

    

  • On the vibration responses of orthotropic laminated cylindrical panels with non-uniform porosity distributions using higher-order shear deformation theory

    Furkan Can Bahadır, Ferruh Turan

    • Resumen
    • Texto completo

    págs. 9975-10005

    

  • Nonlinear dynamics and forced vibrations of simply-supported fractional viscoelastic microbeams using a fractional differential quadrature method

    Salwa A. Mohamed, Mohamed A. Eltaher, Nazira Mohamed, Rasha M. Abo bakr

    • Resumen
    • Texto completo

    págs. 10006-10025

    

  • Thermal buckling analysis of a new type of rectangular FG sandwich plates using a new higher-order shear deformation theory

    Hachemi Belarbi, Belhadj Boucham

    • Resumen
    • Texto completo

    págs. 10026-10045

    

  • Design of multi-topology lattice structures based on a high-quality unit cell library

    Hamza Sulayman Abdullahi, Shurong Zhuo, Dongying Fu, Shuming Gao

    • Resumen
    • Texto completo

    págs. 10046-10072

    

  • A recursive trapezoid-based algorithm designed to compute the strength- and stiffness-related geometric properties of beams with polygonal cross-sections

    Marius Nicolae Baba

    • Resumen
    • Texto completo

    págs. 10073-10097

    

  • Static and dynamic stiffness optimization on the body structure of an electric quadricycle

    Seyed Amirhossein Ahmadi, Abolfazl Khalkhali, Mohammadreza Mohammadi, Mohammad Abasi

    • Resumen
    • Texto completo

    págs. 10098-10123

    

  • Design and development of a not actively driven modular device for parts feeding and sorting

    Edoardo Bianchi, Oliver Jonas Jorg, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José Antonio Yagüe Fabra

    • Resumen
    • Texto completo

    págs. 10124-10147

    

  • Nonlinear vibration analysis of geometrically imperfect FGM Timoshenko beams with porosity and elastically restrained ends in thermal environments

    N. D. Anh, Nguyen Van Thinh, Hoang Van Tung

    • Resumen
    • Texto completo

    págs. 10148-10169

    

  • Damage analysis of functionally graded materials: A finite element investigation utilizing the Gurson–Tvergaard–Needleman (GTN) model for notched plates

    Amir Slamene, Mohamed Mokhtari, Billel Hamza, Sadek Gouasmi, Fatna Telli, Abderraouf Ousidhoum

    • Resumen
    • Texto completo

    págs. 10170-10200

    

  • Semi-analytical modeling and vibration analysis of bolted frame structure under non-uniform pretension

    Wei Sun, Yancheng Chen, Xiaofeng Liu, Dongxu Du, Yu Zhang

    • Resumen
    • Texto completo

    págs. 10201-10255

    

  • Investigation of moving load-induced vibrations in layered functionally graded Terfenol-D beams: a differential quadrature method and analytical approach

    Mukund A. Patil, Suvarna Saraf, Ravikiran Kadoli, Susmita Naskar

    • Resumen
    • Texto completo

    págs. 10256-10272

    

  • Vibration behavior prediction of submerged nanobeams with axially traveling supports: numerical, analytical, and machine learning approaches

    Xiaolan Chen

    • Resumen
    • Texto completo

    págs. 10273-10303