Mechanics based design of structures and machines

• 

  Año 2025, Vol. 53, Número 2

  • Genetic algorithm-based path planning for grain leveling robot

    Qiang Yin, Shuai Liu, JiaXin Gu, Shaoyun Song, Yonglin Zhang, Gang Zhao, ZhiQiang Hao

    • Resumen
    • Texto completo

    págs. 801-819

    

  • Investigating the influences of the geometry and orientation of corrugation in the steel shear walls on the cyclic behavior through the use of finite element analysis

    Yan Liu, Yang Chen, Xi Chen, Sarmistha Hossain

    • Resumen
    • Texto completo

    págs. 820-838

    

  • Identification of excitation frequencies of a vibrating beam using Dynamic Mode Decomposition

    Aayush Talati, Manjeet Keshav

    • Resumen
    • Texto completo

    págs. 839-863

    

  • Sustainable optimization of micro-milling machining parameters considering reliability assessment

    Pengfei Ding, Xianzhen Huang

    • Resumen
    • Texto completo

    págs. 864-901

    

  • Fatigue crack propagation life analysis of propeller

    Ronglei Zhang, Xiang Li, Fanchun Li

    • Resumen
    • Texto completo

    págs. 902-922

    

  • Design of 2D re-entrant auxetic lattice structures with extreme elastic mechanical properties

    Reza Hedayati, Mojtaba Sadighi, Erfan Gholami

    • Resumen
    • Texto completo

    págs. 923-942

    

  • Structural integrity assessment and optimization of control surfaces in coaxial unmanned aerial vehicles: A case study of a micro coaxial UAV

    Luis Reyes, Victor H. Dominguez, Edmundo Javier Ollervides Vazquez, Carlos Garza, Octavio Garcia Salazar

    • Resumen
    • Texto completo

    págs. 943-960

    

  • A comprehensive investigation of the bending and vibration behavior of size-dependent functionally graded nanoplates via an enhanced nonlocal finite element shear model

    Belarbi Mohamed Ouejdi, Soufiane Benounas, Abdelhak Khechai, Pham Van Vinh, Le Truong Son, Eugenio Ruocco, Aman Garg, Scott Gohery

    • Resumen
    • Texto completo

    págs. 961-1000

    

  • Design analysis and development of a gantry robot for multi-layer 3-D concrete printing with simulation and experimental validation

    Rajan Sahai, Ravindra Singh Bisht, Siddharth Singh, Soraj Kumar Panigrahi

    • Resumen
    • Texto completo

    págs. 1001-1030

    

  • Improving the natural frequency of the CubeSat structure using voxel-based topology optimization method with the four-connected seed filling

    Cong Wang, Changdong Zhang, Dawei Li, Tingting Liu, Wenhe Liao

    • Resumen
    • Texto completo

    págs. 1031-1044

    

  • Wave propagation in bidirectional functionally graded tapered beams incorporating porosity effect

    Ouahiba Taleb, Mohamed Sekkal, Rabbab Bachir Bouiadjra, Samir Benyoucef, Abdelouahed Tounsi, Mahmoud M Selim, Khaled Mohamed Khedher

    • Resumen
    • Texto completo

    págs. 1045-1066

    

  • On the isogeometric analysis of vibration and buckling of bioinspired composite plates using inverse hyperbolic shear deformation theory

    Raj Kiran, Diwakar Singh, Sunil Kumar Singh, Abhishek Saini, Yooseob Song, Rahul Vaish

    • Resumen
    • Texto completo

    págs. 1067-1104

    

  • Simulation and analysis of the electro-hydraulic coordinated system for the disc brake system in mining belt conveyor

    Meisheng Yang, Wen Jiang, Jiahan Bao, Kun Lian

    • Resumen
    • Texto completo

    págs. 1105-1119

    

  • Three-dimensional elastoplastic post-buckling analysis of functionally graded plates using a novel meshfree Tchebychev-radial point interpolation approach

    Reza Vaghefi

    • Resumen
    • Texto completo

    págs. 1120-1143

    

  • Mesh antenna cable net form finding optimization by an improved NSGA-II

    Nanyu Meng, Zhiqi Shi, Hao Zhu, Qinghua Zhou

    • Resumen
    • Texto completo

    págs. 1144-1175

    

  • Trajectory design based on frictional resistance of deflector in a hydraulic radial drilling system

    Biwei Fu, Zhiyuan Guo, Jia Yan, Si Zhang

    • Resumen
    • Texto completo

    págs. 1176-1200

    

  • Dimensional synthesis of motion generation of a planar four-bar mechanism

    Wenrui Liu, Xiankun Qu, Bo Li, Tao Qin, Jianlei Sun

    • Resumen
    • Texto completo

    págs. 1201-1227

    

  • Synchronous control method for the walking system of the dual forging manipulators based on triangular velocity planning

    Xiaonan Wang, Fugang Zhai, Runyuan Zhao, Yangtao Xing, Zhiqiang He

    • Resumen
    • Texto completo

    págs. 1228-1248

    

  • Buckle propagation failure of subsea pipelines; experimental, analytical, and numerical simulations

    Mahmoud Alrsai, Ala Alsahalen, Hassan Karampour, Mohammad S. Albdour

    • Resumen
    • Texto completo

    págs. 1249-1279

    

  • A planar bisection strategy for multipoint path synthesis of four-bar linkages

    Rui Wu, Fengping Ning

    • Resumen
    • Texto completo

    págs. 1280-1297

    

  • Approximate modeling of cross-beam multi-axis force/moment sensor through Gaussian process and partial dependence plots for design optimization including stress topology

    Bilsay Sümer, Mithat Can Özin, İlker Murat Koç

    • Resumen
    • Texto completo

    págs. 1298-1328

    

  • The effective finite element method for free and forced vibration analysis of 2D-FGSW plates lying an elastic foundation

    Van Chinh Nguyen, Trung Thanh Tran, Mohammed Sobhy, Nhan Thinh Hoang, Quoc Hoa Pham

    • Resumen
    • Texto completo

    págs. 1329-1350

    

  • Vibration damping by enhancing of magneto-rheological damper performance using novel smart fluid

    Tamer Nabil, Mohamed Bakr, Aly El domiaty, Mohamed Dawood, Tamer M. Mansour

    • Resumen
    • Texto completo

    págs. 1351-1367

    

  • Optimization of brake disk wear loss due to brake pad structure

    Suxia Zhou, Junyan Wang, Xin Xin, Yuduo Sun

    • Resumen
    • Texto completo

    págs. 1368-1391

    

  • Assessing gradient parameters for damage control in notched plates: Finite element analysis of locally functionally graded materials using the Gurson-Tvergaard-needleman (GTN) model

    Amir Slamene, Billel Hamza, Mohamed Mokhtari, Sadek Gouasmi, Rafik Medjahed, Abderraouf Ousidhoum

    • Resumen
    • Texto completo

    págs. 1392-1428

    

  • Nonlinear dynamic modeling and vibration analysis for flexible tethered satellite systems under large deformations

    Zahra Jafari Shahbazzadeh, Ramin Vatankhah, Amin Vahidi-Moghaddam

    • Resumen

    págs. 1429-1446

    

  • Vibration analysis of a composite sandwich plate with a viscoelastic auxetic core, FG-CNTRC interior, and MEE–FGP exterior face sheets

    Nima Namazinia, Akbar Alibeigloo, Mahsa Karimiasl

    • Resumen
    • Texto completo

    págs. 1447-1493

    

  • Optimization of truss structures using multi-objective cheetah optimizer

    Sumit Kumar, Ghanshyam G. Tejani, Pranav Mehta, Sadiq M. Sait, Ali Riza Yildiz, Seyedali Mirjalili

    • Resumen
    • Texto completo

    págs. 1494-1515

    

  • Free vibration analysis of functionally graded composite plates reinforced with linearly and nonlinearly distributed carbon nanotubes in hygrothermal environments

    Zahira Mouas, Rachid Tiberkak, Yasser Chiker, Mourad Bachene, Madjid Ezzraimi

    • Resumen
    • Texto completo

    págs. 1516-1543

    

  • Investigating the growth of surface crack and high cycle fatigue in surface-piercing propeller

    Mojtaba Pakian Bushehri, Mohammad Reza Barati, Parviz Malekzadeh, Ehsan Bahmyari

    • Resumen
    • Texto completo

    págs. 1544-1571