Mechanics based design of structures and machines

• 

  Año 2025, Vol. 53, Número 3

  • Frequency-band programmable piezoelectric energy harvesters with variable substrate material, tip mass and fractal architectures: Experimental and numerical investigations

    Sudip Mondal, T. Mukhopadhyay, F. Scarpa, S. Naskar

    • Resumen
    • Texto completo

    págs. 1603-1634

    

  • Exact solution for free vibration analysis of non-uniform thickness functionally graded porous nanosheet with surface effect based on variable nonlocal and length-scale parameters

    Ngo Van Huong Binh, Van Ke Tran, Pham Quoc Hoa, Nhan Thinh Hoang, Pham Hoang Tu

    • Resumen
    • Texto completo

    págs. 1635-1667

    

  • Semi-analytical results for transient poroelastic behavior of a functionally graded hollow sphere

    Tuan Nguyen-Sy

    • Resumen
    • Texto completo

    págs. 1668-1682

    

  • A closed form dynamic stiffness formulation for buckling analysis of FG-CNTRC plate and plate assemblies with internal line support

    Raj Kumar, Prasun Jana

    • Resumen
    • Texto completo

    págs. 1683-1708

    

  • Vibration response on the rod of vortex bladeless wind power generator for a sandwich beam with various face sheets and cores based on different boundary conditions

    Mahsa Pahlavanzadeh, Mehdi Mohammadimehr, Mohsen Irani Rahaghi, Seyed Mojtaba Emamat

    • Resumen
    • Texto completo

    págs. 1709-1735

    

  • Damage investigation in steel pipe under pressure and combined bending moment: Application in structure connected by elbow and reduced tee

    Djezouli Moulai Khatir, Billel Hamza, Amir Slamene, Mohamed Mokhtari, Hicham Tebabna, Abdelmoumen Bennadri

    • Resumen
    • Texto completo

    págs. 1736-1759

    

  • Transient road signals simulation strategy in a Stewart platform

    Verónica Santos Arconada, Jon García Barruetabeña

    • Resumen
    • Texto completo

    págs. 1760-1777

    

  • FGM concept used in damage analysis of heat-treated elbows under out-of-plane combined bending moment

    Fatna Telli, Mohamed L. Amine Khiari, Mohamed Mokhtari, Habib Benzaama

    • Resumen
    • Texto completo

    págs. 1778-1798

    

  • A stochastic meshless framework for higher-order free vibration analysis and static bending of porous functionally graded plates

    Ping Xiang, Zhanjun Shao, Han Zhao, Peng Zhang, Xiaonan Xie, Xiaochun Liu

    • Resumen
    • Texto completo

    págs. 1799-1826

    

  • Studies on multi-frequency synchronization of two pairs of counter-rotating exciters in a split drive double-body vibrating system

    Ruoqing Zhang, Wenchao Hu, Siyuan Yi, Xu Zhang, Xueliang Zhang

    • Resumen
    • Texto completo

    págs. 1827-1853

    

  • Study on the misalignment deformation threshold of girder end of curved bridge with ballasted track

    Pang Lin, Liu Xiang

    • Resumen
    • Texto completo

    págs. 1854-1874

    

  • Incorporating bearing flexibility into a digital twin for supervised machine learning-based ball bearing diagnostics

    Souleymane Sow, Xavier Chiementin, Lanto Rasolofondraibe, Olivier Cousinard

    • Resumen
    • Texto completo

    págs. 1875-1891

    

  • Practical solutions for global buckling analysis in tall buildings: classic sandwich continuous model

    Mao Cristian Pinto Cruz

    • Resumen
    • Texto completo

    págs. 1892-1926

    

  • Study on instrumental coupler for heavy haul train

    Yazhao Wang, Wei Zhou, Kang Zhou, Congcong Fang, Hongkai Yan, Zhixin Wang, Xinyi Zhou

    • Resumen
    • Texto completo

    págs. 1927-1949

    

  • Enhancing the reliability of a robotic arm through lightweighting and vibration control with modal analysis and topology optimization

    Mamoun Alshihabi, Merdan Ozkahraman, Mevlüt Yunus Kayacan

    • Resumen
    • Texto completo

    págs. 1950-1974

    

  • Torsional vibration suppression of a gear-rotor system using an inerter magnet nonlinear energy sink

    Hui Liu, Hongliang Yao, Jinxin Dou, Ruyu Jia

    • Resumen
    • Texto completo

    págs. 1975-1999

    

  • Precise modeling and stress response analysis of the aero-engine clamp: A simulation and experimental study

    Xiaochi Qu, Weijiao Chen, Xumin Guo, Hui Ma, Zhiwei Cao Guo Yao, Shuo Chen, Ruixin Zhang

    • Resumen
    • Texto completo

    págs. 2000-2020

    

  • Elastoplastic limit analysis of functionally graded materials pipe elbows to predict the damage under in-plane bending moment using XFEM-Technic

    Rafik Medjahed, Mohamed Mokhtari, Sadek Gouasmi, Billel Hamza, Amir Slamene, Hanane Merzouk

    • Resumen
    • Texto completo

    págs. 2021-2048

    

  • Dynamic analysis of a flexible rotor system considering the bearing slip

    Xinbin Li, Yajun Xu, Suhe Huang, Jing Liu

    • Resumen
    • Texto completo

    págs. 2049-2074

    

  • Free vibration of spinning stepped functionally graded circular cylindrical shells in a thermal environment

    Chun Hao Zhang, Qingdong Chai, Yan Qing Wang

    • Resumen
    • Texto completo

    págs. 2075-2092

    

  • Effects of rail models on aerodynamic characteristics of trains in crosswinds at a large yaw angle

    Hongrui Gao, Tanghong Liu, Houyu Gu, Haoyang Zeng

    • Resumen
    • Texto completo

    págs. 2093-2115

    

  • Effect of geometric parameters on dynamic fracture toughness of compact tensile specimens

    Zichun Yue, Xinhui Shen, Zhongliang Chang, Guangping Zou

    • Resumen
    • Texto completo

    págs. 2116-2134

    

  • Pure bending of functionally graded curved beams at the onset of yielding

    Ömer Can Farukoğlu, İhsan Korkut

    • Resumen
    • Texto completo

    págs. 2135-2151

    

  • Size-dependent finite element buckling analysis of porous cylindrical micro-shells reinforced by graphene platelets

    Mohsen Taghizadeh, Amir Reza Askari, Hossein Farzinpoor

    • Resumen
    • Texto completo

    págs. 2152-2181

    

  • Dynamic analysis of laminated plate and ballastless track slab on Pasternak foundation under moving load based on different shear deformation theory

    Qing Xie, Baikuang Chen, Jincheng Tan, Xuebing Zhang, Ping Xiang

    • Resumen
    • Texto completo

    págs. 2182-2214

    

  • Kinematic analysis and experimental validation of a tripod parallel continuum manipulator

    Oscar Altuzarra Maestre, Víctor Petuya Arcocha, M. Acevedo, M. Vizcaíno, S. Rodríguez

    • Resumen
    • Texto completo

    págs. 2215-2238

    

  • Crashworthiness analysis of hierarchically reinforced double-square tubes under axial impact

    Cuiping Huang, Xiaolin Deng

    • Resumen
    • Texto completo

    págs. 2239-2261

    

  • Optimal placement of piezoelectric actuator/sensor pairs for active vibration control of beams with different boundary conditions

    Xin Yue Zhang, Jie Chen, Wei Zhang

    • Resumen
    • Texto completo

    págs. 2262-2279

    

  • Stokes’ transform solution method for dynamics of a short-fiber-reinforced nanorod via second-order strain gradient theory

    Murat Akpınar, Büşra Uzun, Mustafa Özgür Yayli

    • Resumen
    • Texto completo

    págs. 2280-2300

    

  • 3D coupled vibrations of asymmetric nano-particle mass sensors: Two-phase integral nonlocal strain gradient model and MD simulation

    Mahmood Fakher, Davood Younesian

    • Resumen
    • Texto completo

    págs. 2301-2336