International journal of solids and structures

• 

  Año 2005, Vol. 42, Número 2

  • Foreword

    Mark Kachanov

    pág. 307

    

  • On quantitative characterization of microstructures and effective properties

    Mark Kachanov, Igor Sevostianov

    págs. 309-336

    

  • Micromechanical modelling of cyclic plasticity incorporating damage

    A. Pirondi, W. Brocks, N. Bonora, D. Steglich

    págs. 337-351

    

  • On the solution of the dynamic Eshelby problem for inclusions of various shapes

    Thomas M. Michelitsch, Valery M. Levin, Huajian Gao, Jizeng Wang

    págs. 353-363

    

  • Probabilistic energy based model for prediction of transverse cracking in cross-ply laminates

    Zvi Hashin, Vladimir Vinogradov

    págs. 365-392

    

  • Elastic properties of inhomogeneous transversely isotropic rocks

    V.M. Levin, M.G. Markov

    págs. 393-408

    

  • On micromechanical modeling of particulate composites with inclusions of various shapes

    Igor Tsukrov, Oleg Eroshkin

    págs. 409-427

    

  • Effect of an inhomogeneous interphase zone on the bulk modulus and conductivity of a particulate composite

    Melanie P. Lutz, Robert W. Zimmerman

    págs. 429-437

    

  • The effect of the multi-axiality of compressive loading on the accuracy of a continuum model for layered materials

    I.A. Guz

    págs. 439-453

    

  • Effective elastic properties of matrix composites with transversely-isotropic phases

    Nadir Yilmaz, Igor Sevostianov, V.I. Kushch, Valery Levin

    págs. 455-476

    

  • Effective characteristics and stress concentrations in materials with self-similar microstructure

    A.V. Dyskin

    págs. 477-502

    

  • Homogeneity of isostatic pressure-assisted sintering of agglomerated powder

    Eugene Olevsky, Andrey Maximenko

    págs. 503-515

    

  • Effect of a nonuniform distribution of voids on the plastic response of voided materials: a computational and statistical analysis

    Jean-Claude Michel, Nicolas Bilger, Pierre Suquet, Hervé Moulinec, François Auslender, André Zaoui, Michel Bornert

    págs. 517-538

    

  • Modeling and direct simulation of near-field granular flows

    Tarek I. Zohdi

    págs. 539-564

    

  • Numerical experiments on the rupture of brittle solids¿¿variation of microstructure, loading and dimensions

    Rainer Dattke, Ioannis Doltsinis

    págs. 565-579

    

  • Suppression of edge cracking in layered ceramic composites by edge coating

    Adam J. Monkowski, Glenn E. Beltz

    págs. 581-590

    

  • Nonlinear viscoelastic micromechanical analysis of fibre-reinforced polymer laminates with damage evolution

    Zihui Xia, Yunfa Zhang, Fernand Ellyin

    págs. 591-604

    

  • On the fracture behavior of inhomogeneous materials¿¿A case study for elastically inhomogeneous bimaterials

    F.D. Fischer, J. Predan, O. Kolednik, N.K. Simha, G.X. Shan

    págs. 605-620

    

  • Numerical simulation of solid state sintering

    Veena Tikare, Eugene Olevsky, Michael Braginsky

    págs. 621-636

    

  • Nano-ductile crack propagation in glasses under stress corrosion: spatiotemporal evolution of damage in the vicinity of the crack tip

    C. Guillot, E. Bouchaud, D. Dalmas, S. Prades, D. Bonamy

    págs. 637-645

    

  • Predictions of strength in MEMS components with defects¿¿a novel experimental¿theoretical approach

    B. Peng, H.D. Espinosa, N. Pugno

    págs. 647-661

    

  • Development of a methodology for determination of interface fracture toughness of laminate composites¿the 0°/90° pair

    Vinodkumar Boniface, Leslie Banks-Sills, Rami Eliasi

    págs. 663-680

    

  • Fracture initiation associated with chemical degradation: observation and modeling

    Salvatore S. Stivala, Kalyan Sehanobish, Byoung-Ho Choi, Alexander Chudnovsky, Zhenwen Zhou, Clive P. Bosnyak

    págs. 681-695

    

  • Dynamic mechanical and fracture properties of an infiltrated TiC-1080 steel cermet

    M.P. Dariel, N. Frage, D. Rittel

    págs. 697-715

    

  • On quasi-non-destructive strength and toughness testing of elastic¿plastic materials

    Hans-Jakob Schindler

    págs. 717-725

    

  • Structure of weak shock waves in 2-D layered material systems

    Liren Tsai, Vikas Prakash

    págs. 727-750

    

  • Raman spectroscopy investigations of functionally graded materials and inter-granular mechanics

    Maher S. Amer

    págs. 751-757

    

  • Thermal fatigue crack networks parameters and stability: an experimental study

    G. Degallaix, V. Maillot, S. Degallaix, A. Fissolo

    págs. 759-769

    

  • Thermal fatigue crack networks: an computational study

    A. Fissolo, N. Haddar, V. Maillot

    págs. 771-788