Resumen de Determining efficacy of monitoring devices on ceramic bond to resin composite
E. Osorio Ruiz, Fátima Sánchez Aguilera, R. Osorio Ruiz, Franklin Garcia Godoy, Miguel Ángel Cabrerizo Vílchez, Manuel Toledano Pérez
Objectives: This paper aims to assess the effectiveness of 3D nanoroughness and 2D microroughness evaluations, by their correlation with contact angle measurements and shear bond strength test, in order to evaluate the effect of two different acids conditioning on the bonding efficacy of a leucite-based glass-ceramic to a composite resin.
Study Design: Ceramic (IPS Empress) blocks were treated as follows: 1) no treatment, 2) 37% phosphoric acid (H 3 PO 4 ), 15 s, 3) 9% hydrofluoric acid (HF), 5 min. Micro- and nano-roughness were assessed with a profilometer and by means of an atomic force microscopy (AFM). Water contact angle (CA) measurements were determined to assess wettability of the ceramic surfaces with the asixymetric drop shape analysis contact diameter technique.
Shear bond strength (SBS) was tested to a resin composite (Z100) with three different adhesive systems (Scotch bond Multipurpose Plus, Clearfil New Bond, ProBOND). Scanning electron microscopy (SEM) images were performed.
Results: Nanoroughness values assessed in 50x50 μm areas were higher for the HF group, these differences were not detected by profilometric analysis. HF treatment created the nano- roughest surfaces and the smallest CA (p<0.05), producing the highest SBS to the composite resin with all tested adhesive systems (p<0.05). No diffe- rences existed between the SBS produced by the adhesive systems evaluated with any of the surface treatments tested.
Conclusions: Nano-roughness obtained in a 50x50 μm scan size areas was the most reliable data to evaluate the topographical changes produced by the different acid treatments on ceramic surfaces.
