Resumen de Evaluation of the corrosion performance of Cu–Al intermetallic compounds and the effect of Pd addition
Adeline B.Y. Lim, Wei Jian Neo, Oranna Yauw, Bob Chylak, Chee Lip Gan, Zhong Chen
AbstracCopper wire has become a mainstream bonding material in fine-pitch applications due to the rising cost of gold wire. In recent years, palladium-coated copper (Pd–Cu) wire is being increasingly used to overcome some constraints posed by pure Cu wire. During wire bonding with aluminum bond pads, different intermetallic compound (IMC) phases that have been identified at the bond interface are typically CuAl2, CuAl and Cu9Al4. However, the corrosion susceptibility of these IMCs has not been investigated. This paper compares the electrical impedance and corrosion performance of the three types of Cu–Al IMCs in an acidic chloride medium by employing electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The analysis of the potentiodynamic polarization results was performed using Tafel extrapolation. A comparison was made with pure Cu and Al. The effect of Pd alloy on the IMC corrosion performance has also been studied. Among the three Cu–Al IMCs, Cu9Al4 was observed to have the largest corrosion rate followed by CuAl2 and CuAl. For the metals, Cu was observed to have the lowest corrosion rate and Al is the most easily corroded. The addition of Pd of up to 10 wt.% replacement of the Cu in the alloys slightly improves the corrosion resistance of the metals and IMCs.
