Design issues of an IPM motor for EPS

• C.F. Wang ^[1] ; J.X. Shen ^[2] ; P.C.K. Luk ^[1] ; W.Z. Fei ^[1] ; M.J. Jin ^[2]
  1. [1] Cranfield University

     Cranfield University

     Cranfield, Reino Unido

     
  2. [2] Zhejiang University

     Zhejiang University

     China

     
• Localización: Compel: International journal for computation and mathematics in electrical and electronic engineering, ISSN 0332-1649, Vol. 31, Nº 1 (Special Issue: Electric machines and systems), 2012, págs. 71-87
• Idioma: inglés
• Enlaces
  • Texto completo
• Resumen

  • Purpose – The purpose of this paper is to present the design procedure of an interior permanent magnet (IPM) motor used in electric power steering (EPS), and some critical issues which have considerable impacts on the machine's performance are fully discussed before detailed sizing optimization.

    Design/methodology/approach – The design specifications are derived according to application overall requirements. Critical issues which have considerable impacts on the machine's performance, such as operation mode, rotor structure and slot/pole combination, are analyzed based on literature review. The proposed machine is optimized, and the losses and efficiency are computed, using 2‐D finite element analysis (FEA).

    Findings – Before detailed sizing optimization, machine type selection is fully discussed. Aspects such as brushless ac (BLAC) operation mode, IPM rotor structure and combination of 12‐slot/10‐pole are quite suitable for EPS application. Consequently, a 12‐slot/10‐pole sinusoidally excited IPM machine with concentrated windings is selected, since it is convenient to obtain sinusoidal back electromotive force (back‐EMF), minimum cogging torque and torque ripple, short end windings and high efficiency, as well as simple rotor assembly. The estimated excellent performance confirms that the proposed machine can be an attractive solution for EPS.

    Research limitations/implications – The excitation current is ideal sinusoidal, while some harmonic components are neglected. Besides, in future, the experimental test should be carried out for validation.

    Originality/value – A reasonable design procedure, where the motor type selection should be first addressed before detailed sizing design, is carried out. A 12‐slot/10‐pole sinusoidally excited IPM machine with concentrated windings is provided as a quite competitive candidate for EPS application.