Brasil
Neste trabalho, relatamos um estudo sobre a influência do tempo de síntese na obtenção do composto denominado bis(aqua)-μ-[tereftalato-kO]cobre (II) (Cu2(BDC)(H2O)2), a partir da reação entre o sulfato de cobre penta-hidratado (CuSO4.5H2O) e tereftalato de sódio (Na2BDC) em meio aquoso via método hidrotérmico convencional. O material já elucidado anteriormente foi obtido via difusão lenta em um tubo H, e nessa ocasião foi obtido uma mistura de fases sendo uma delas a fase (Cu2(BDC)(H2O)2). Observou-se que via método hidrotérmico, todas as amostras apresentam a presença do reagente precursor CuSO4.5H2O não reagido identificado, a partir de seus picos característicos nos difratogramas. Avaliou-se dessa forma, que a partir de 24 horas de síntese se torna mais vantajoso o método descrito neste trabalho, pois será obtido um material com um maior grau de pureza da fase majoritária Cu2(BDC)(H2O)2, e menor presença do reagente precursor CuSO4.5H2O.Palavras chave: Síntese, tempo, MOFs, tereftalatos de cobre.
In this work, we report a study on the influence of the synthesis time in obtaining the compound called bis(aqua)-μ-[terephthalate-kO] copper (II) (Cu2 (BDC)(H2O)2), from the reaction between copper sulfate pentahydrate (CuSO4 .5H2O) and sodium terephthalate (Na2BDC) in aqueous medium via conventional hydrothermal method. The material already elucidated was obtained via slow diffusion in an H tube, and on that occasion a mixture of phases was obtained, one of them being the phase (Cu2 (BDC)(H2O)2). It was observed that via the hydrothermal method, all samples have the presence of theprecursor reagent CuSO4.5H2O identified from their characteristic peaks in the diffractograms. It was evaluated in this way, that after 24 hours of synthesis, the method described in this work becomes more advantageous, since a material with a higher degree of purity of the majority phase Cu2 (BDC)(H2O)2 , and less presence of the reagent precursor CuSO4.5H2O.
© 2001-2024 Fundación Dialnet · Todos los derechos reservados