Virtual sensor of insufficient lubrication in variable speed compressors
- Autores: Rubén Ossorio, Emilio Navarro Peris, Alexandra López Navarro
- Localización: Libro de actas XI Congreso Ibérico y IX Congreso Iberoamericano de Ciencias y Técnicas del Frío Cytef2022: Avances en Ciencias y Técnicas del Frío - 11. Cartagena, España, 17-19 abril, 2022 / Antonio López Gómez (dir. congr.), José Ramón García Cascales (dir. congr.), Ginés Benito Martínez Hernández (dir. congr.), Arturo Esnoz Nicuesa (dir. congr.), Asunción Iguaz Gaínza (dir. congr.), Fernando Illán Gómez (dir. congr.), Francisco Javier Sánchez Velasco (dir. congr.), José Pablo Delgado Marín (dir. congr.), Ramón Antonio Otón Martínez (dir. congr.), 2022, ISBN 978-84-17853-55-6, págs. 197-201
- Idioma: inglés
- Enlaces
-
Resumen
The ability to modulate the compressor’s speed and adapt the capacity to the load has permitted to decrease the annual energy consumption in many applications. However, in the compressor, having the correct lubrication at high speeds usually imply having insufficient lubrication at low speeds. This fact has to be considered by manufacturers as it limits the speed range of the compressor. In this study, a methodology to establish the working limit of a compressor is proposed. It is based on the specific consumption surface of the compressor and no oil circulation measurements are required. A compressor working between 6600 and 900rpm with propane and POE oil has been used to test the proposed methodology. The results show that lubricating issues in this compressor start at 1800rpm and rise as speed decreases.
