Se estudió la remoción de cromo III y demanda química de oxígeno (DQO) de muestras de aguas residuales de curtiduría por electrocoagulación (EC) en un reactor electroquímico de operación discontinua. La influencia de los tiempos (15 a 45 min), voltajes (5 a 10 V), diluciones (0 a 2) y sus interacciones en el proceso de EC fueron significativos (p<0,05). Durante el proceso de EC de las muestras se observó incrementos de pH, temperatura y disminuciones de la conductividad. La máxima remoción de cromo III (~98 %) y DQO (~48 %) fue obtenida con el tratamiento (45 min, 10 V y dilución de 2). Asimismo, los resultados experimentales permitieron desarrollar modelos matemáticos para la remoción de cromo III y DQO, respectivamente.
Removal of trivalent chromium and chemical oxygen demand (DQO) of tannery wastewater samples by electrocoagulation (EC) from discontinuous operation electrochemical reactor were studied. The influence of times (15 to 45 min), voltages (5 to 10 V), dilutions (0 to 2) and their interactions in EC process were significant (p <0.05). Increases in pH, temperature, and decreases of conductivity of the samples during the EC process were observed. The maximum removal of trivalent chromium (~98 %) and DQO (~48 %) was obtained with the treatment (45 min, 10 V and dilution of 2). Likewise, the experimental results allowed to develop mathematical models for the removal of trivalent chromium and DQO, respectively.
© 2001-2024 Fundación Dialnet · Todos los derechos reservados