Numerical simulation of fatigue crack growth in an engine heat shield

• Zhaolong Wang ^[1] ; Yitong Xu ^[2] ; Fanchun Li ^[1]
  1. [1] Dalian Maritime University

     Dalian Maritime University

     China

     
  2. [2] Jiangnan Shipyard (Group) Co., Ltd., Shanghai, China
• Localización: Mechanics based design of structures and machines, ISSN 1539-7734, Vol. 52, Nº. 9, 2024, págs. 6435-6461
• Idioma: inglés
• Enlaces
  • Texto completo
• Resumen

  • In order to prevent the body from overheating, a corresponding thermal protection device is usually designed on the inner wall of the combustion chamber. The working environment of this thermal protection device is very harsh, and it needs to withstand internal and external pressure loads and thermal radiation loads of the combustion chamber, especially at the connection between the cylinder and the support parts, the force is harsher. In order to avoid engine damage, causing unnecessary losses. In this article, the thermal–mechanical coupling analysis of the heat shield is carried out by finite element method to analyze the thermal stress and mechanical stress. According to the finite element simulation results, the initial cracks are inserted, respectively, at the stress concentration. Using linear elastic fracture mechanics and Forman–Newman–de Koning models, the crack growth lifetimes of cracks at different locations were calculated. The results of the study show that comparing the initial cracks at different locations, the cracks on the side near the edge of the heat shield have the largest reduction in crack growth life of 64.4% and the critical crack length of 52.0%. The linear superposition of thermal and mechanical stresses under different working conditions has different degrees of nonlinear effects on the crack growth life and critical crack length. The research work in this article can provide a basis for the evaluation of fatigue crack growth life of heat shield and can also provide a reference for engine maintenance.