Smart diagnosis for cable sheath condition in high voltage cable systems
- Autores: Marina Adel Shokry Nada
- Directores de la Tesis: Julio Martínez (dir. tes.), Fernando Garnacho Vecino (codir. tes.)
- Lectura: En la Universidad Politécnica de Madrid ( España ) en 2020
- Idioma: español
- Tribunal Calificador de la Tesis: José Carpio Ibáñez (presid.), Rosa María De Castro Fernández (secret.), Mario Mañana Canteli (voc.), Carlos Antonio Platero Gaona (voc.), Ricard Bosch Tous (voc.)
- Programa de doctorado: Programa de Doctorado en Ingeniería Eléctrica y Electrónica por la Universidad de Oviedo y la Universidad Politécnica de Madrid
- Materias:
- Enlaces
- Tesis en acceso abierto en: Archivo Digital UPM
- Resumen
Nowadays many researchers are focusing on on-line condition monitoring of high-voltage (HV) insulated cable systems to prevent failures. With the aim of reducing the current induced in the cable sheaths, cross-bonding (CB) grounding cable systems are used in long distance power transmission land lines. This thesis proposes a new criterion for the detection and localization of defects that might occur in the cables sheath when a CB configuration is adopted. The criterion proposed can be applied at different levels of load current and at different percentage of unbalance in minor sections. For the application of the criterion, the cable system under evaluation is modeled using the ATP software. Various practical cases were studied showing the effectiveness of the criterion for the detection and localization of different types of defects in simulated cable systems. Furthermore, in order to validate the criteria adopted for the defect detection, based on the ATP model, two real cases were evaluated. The results obtained proved that this criterion is suitable for the detection and localization of defects in the cables sheath, when on-line measurements are performed in monitoring applications.
