Contributions to bluetooth low energy mesh networks
- Autores: Seyed Mahdi Darroudi
- Directores de la Tesis: Carles Gómez Montenegro (dir. tes.)
- Lectura: En la Universitat Politècnica de Catalunya (UPC) ( España ) en 2020
- Idioma: español
- Materias:
- Texto completo no disponible (Saber más ...)
- Resumen
Bluetooth Low Energy (BLE) has become a popular Internet of Things (IoT) technology. However, it was originally designed to only support the star topology. This PhD thesis investigates and evaluates different Bluetooth Low Energy (BLE) mesh network approaches, including existing ones (such as the Bluetooth Mesh standard), and our own solution for IPv6-based BLE mesh networking (6BLEMesh). The thesis comprises 6 main contributions: 1.- A comprehensive survey on existing BLE mesh networking proposals and a taxonomy for BLE mesh network solutions.
2.- An energy consumption model for Bluetooth Mesh. The model allows to predict useful performance parameters, such as device average current consumption, device lifetime and energy efficiency, considering the impact of the most relevant Bluetooth Mesh parameters, i.e. PollTimeout and ReceiveWindow, as well as application parameters (e.g. the data interval for a sensor that periodically reports its readings).
3.- A new proposed IPv6-based BLE mesh networking IETF standard (in progress), called 6BLEMesh. After defining the characteristics and properties of 6BLEMesh, we evaluated it in terms of connectivity, latency, RTT, and energy consumption.
4.- For the connectivity evaluation of 6BLEMesh, we developed an analytical model that takes a set of network and scenario characteristics as inputs, and provides two main results: i) the probability of no isolation of a node, and ii) the k-connectivity of the considered network. We validated the model by simulation.
5.- An implementation, and an experimental evaluation, of 6BLEMesh. We built a three-node testbed consisting of all node types (i.e. 6LN, 6LR and 6LBR). We used three different popular commercial hardware platforms. We evaluated a number of performance parameters on the testbed, related with latency and energy consumption. Next, we characterized the current consumption patterns of the complete life cycle for different node types in the three-node testbed. We also evaluated the energy performance of a 6LN on three different platforms. We presented a 6LN current consumption model for different connInterval settings. To this end, we experimentally characterized each current consumption state in terms of its duration time and average current consumption value. We illustrated the impact of connInterval on energy performance.
6.- A comparison between Bluetooth Mesh and 6BLEMesh, in terms of protocol stack, protocol encapsulation overhead, end-toend latency, energy consumption, message transmission count, end-to-end reliability, variable topology robustness and Internet connectivity. Bluetooth Mesh and 6BLEMesh offer fundamentally different BLE mesh networking solutions. Their performance depends significantly on their parameter configuration. Nevertheless, the following conclusions can be obtained. Bluetooth Mesh exhibits slightly greater protocol encapsulation overhead than 6BLEmesh. Both Bluetooth Mesh and 6BLEMesh offer flexibility to configure per-hop latency. For a given latency target, 6BLEMesh offers lower energy consumption. In terms of message transmission count, both solutions may offer relatively similar performance for small networks; however, 6BLEMesh scales better with network size and density. 6BLEMesh approaches ideal packet delivery probability in the presence of bit errors for most parameter settings (at the expense of latency increase), whereas Bluetooth Mesh requires path diversity to achieve similar performance. Bluetooth Mesh does not suffer the connectivity gaps experimented by 6BLEMesh due to topology changes.
Finally, 6BLEMesh naturally supports IP-based Internet connectivity, whereas Bluetooth Mesh requires a protocol translation gateway.
