Resumen de A Multi-core processor for hard real-time systems
Marco Paolieri
The increasing demand for new functionalities in current and future hard real-time embedded systems, like the ones deployed in automotive and avionics industries, is driving an increment in the performance required in current embedded processors. Multi-core processors represent a good design solution to cope with such higher performance requirements due to their better performance-per-watt ratio while maintaining the core design simple. Moreover, multi-cores also allow executing mixed-criticality level workloads composed of tasks with and without hard real-time requirements, maximizing the utilization of the hardware resources while guaranteeing low cost and low power consumption. Despite those benefits, current multi-core processors are less analyzable than single-core ones due to the interferences between different tasks when accessing hardware shared resources. As a result, estimating a meaningful Worst-Case Execution Time (WCET) estimation - i.e. to compute an upper bound of the application's execution time - becomes extremely difficult, if not even impossible, because the execution time of a task may change depending on the other threads running at the same time. This makes the WCET of a task dependent on the set of inter-task interferences introduced by the co-running tasks. Providing a WCET estimation independent from the other tasks (time composability property) is a key requirement in hard real-time systems. This thesis proposes a new multi-core processor design in which time composability is achieved, hence enabling the use of multi-cores in hard real-time systems. With our proposals the WCET estimation of a HRT is independent from the other co-running tasks. To that end, we design a multi-core processor in which the maximum delay a request from a Hard Real-time Task (HRT), accessing a hardware shared resource can suffer due to other tasks is bounded: our processor guarantees that a request to a shared resource cannot be delayed longer than a given Upper Bound Delay (UBD). In addition, the UBD allows identifying the impact that different processor configurations may have on the WCET by determining the sensitivity of a HRT to different resource allocations. This thesis proposes an off-line task allocation algorithm (called IA3: Interference-Aware Allocation Algorithm), that allocates tasks in a task set based on the HRT's sensitivity to different resource allocations. As a result the hardware shared resources used by HRTs are minimized, by allowing Non Hard Real-time Tasks (NHRTs) to use the rest of resources. Overall, our proposals provide analyzability for the HRTs allowing NHRTs to be executed into the same chip without any effect on the HRTs. The previous first two proposals of this thesis focused on supporting the execution of multi-programmed workloads with mixed-criticality levels (composed of HRTs and NHRTs). Higher performance could be achieved by implementing multi-threaded applications. As a first step towards supporting hard real-time parallel applications, this thesis proposes a new hardware/software approach to guarantee a predictable execution of software pipelined parallel programs. This thesis also investigates a solution to verify the timing correctness of HRTs without requiring any modification in the core design: we design a hardware unit which is interfaced with the processor and integrated into a functional-safety aware methodology. This unit monitors the execution time of a block of instructions and it detects if it exceeds the WCET. Concretely, we show how to handle timing faults on a real industrial automotive platform.
