Scripta materialia

• 

  Año 2005, Vol. 53, Número 6

  • Formation of coarse-grained inter-particle regions during hot isostatic pressing of nanocrystalline powder

    Feng Tang, Masuo Hagiwara, Julie M. Schoenung

    págs. 619-624

    

  • An analysis of kinetic Monte Carlo simulation as a tool for modelling strain ageing

    A.J.P. Gater, S.G.R. Brown

    págs. 625-630

    

  • Segregant-induced cavitation of Sn/Cu reactive interface

    J.K. Shang, P.L. Liu

    págs. 631-634

    

  • Growth kinetics of C11_b lamellae in (Mo_0.85, Nb_0.15)Si₂ intermetallics

    Aidang Shan, Wei Li, Jiansheng Wu, Haibo Yang

    págs. 635-639

    

  • Isothermal nanocrystallization behavior of Zr_41.25Ti_13.75Ni₁₀Cu_12.5Be_22.5 bulk metallic glass in the supercooled liquid region

    G. Wang, J.D. Fitz Gerald, J.F. Sun, J. Shen, D.J. Llewellyn, B.D. Zhou, Z.H. Stachurski

    págs. 641-645

    

  • Inhomogeneous tensile deformation in ultrafine-grained aluminum

    C.Y. Yu, P.C. Hung, P.W. Kao, C.P. Chang, P.L. Sun

    págs. 647-652

    

  • In situ observations of the pest oxidation process of NbSi₂ at 1023K

    A.D. Shan, J.S. Wu, F. Zhang, L.T. Zhang

    págs. 653-656

    

  • Threshold pressure for infiltration of ceramic compacts containing fine powders

    J. Wannasin, M.C. Flemings

    págs. 657-661

    

  • Spark plasma sintering of silicon nitride/silicon carbide nanocomposites with reduced additive amounts

    Amiya K. Mukherjee, Julin Wan, Ren-Guan Duan

    págs. 663-667

    

  • Effect of TiX(X=C, N, O) additives on microstructure and properties of silicon nitride based ceramics

    Jozef Vleugels, Ren-Guan Duan, Gert Roebben, Omer Van der Biest

    págs. 669-673

    

  • TEM and 3DAP characterization of an age-hardened Mg¿Ca¿Zn alloy

    J.C. Oh, T. Ohkubo, T. Mukai, K. Hono

    págs. 675-679

    

  • Heating rate dependence of glass transition and primary crystallization of Al₈₈Gd₆Er₂Ni₄ metallic glass

    M. Ohnuma, N. Tian, K. Hono

    págs. 681-685

    

  • Backward extrusion of Al¿Al₃Ti functionally graded material: Volume fraction gradient and anisotropic orientation of Al₃Ti platelets

    Yasuyoshi Fukui, P.D. Sequeira, Yoshimi Watanabe

    págs. 687-692

    

  • Sheet fabrication of bulk amorphous alloys by twin-roll strip casting

    Sang Bok Lee, Nack J. Kim, Hyung-Tae Chung, Jung G. Lee, Sung S. Park

    págs. 693-697

    

  • Improvement of microstructure and interface structure of eutectic Sn¿0.7Cu solder with small amount of Zn addition

    Fengjiang Wang, Xin Ma, Yiyu Qian

    págs. 699-702

    

  • Processing of carbon nanotubes with electron beams in gas atmospheres

    Xiao-Li Yuan, Shun Ito, Takashi Sekiguchi, Jun-ichi Niitsuma

    págs. 703-705

    

  • Conduction type evolution during eutectoid decomposition of Mn-added ¿-Fe₂Si₅ alloy

    J.X. Jiang, G. Sasaki, O. Yanagisawa, K. Matsugi

    págs. 707-711

    

  • Crosshead speed dependence of the notch tensile strength of a high strength steel in the presence of hydrogen

    Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki

    págs. 713-718

    

  • A note on the von Neumann¿Mullins equation

    Nils Ryum, Ola Hunderi

    págs. 719-722

    

  • Synthesis of oxidation resistant silicide coatings on Mo¿Si¿B alloys

    J.H. Perepezko, R. Sakidja, J.S. Park, J. Hamann

    págs. 723-728

    

  • Solidification path in the Ni-base superalloy, IN713LC¿quantitative correlation of last stage solidification

    B.A. Shollock, N. D¿Souza, H.B. Dong, M.G. Ardakani

    págs. 729-733

    

  • Bulk instability of nickel disilicide at reduced temperatures

    M.E. Loomans, S.J. Chua, D.Z. Chi

    págs. 735-738

    

  • Martensitic surface relief in an Fe¿Mn¿Si-based alloy strained by bending

    N. Stanford, D. Dunne

    págs. 739-744

    

  • High density nano-scale twins in Cu induced by dynamic plastic deformation

    W.S. Zhao, Q.H. Lu, J.Y. Guo, K. Lu, N.R. Tao

    págs. 745-749

    

  • Ab initio calculation of the bcc Mo¿Al (molybdenum¿aluminium) phase diagram: Implications for the nature of the ¿₂-MoAl phase

    Cláudio Geraldo Schön, Helena Maria Petrilli, Pablo Guillermo Gonzales-Ormeño

    págs. 751-756

    

  • On the apparent saturation of the average disorientation angle with plastic deformation

    W. Pantleon

    págs. 757-762

    

  • Dynamic recrystallization of ferrite during warm deformation of ultrafine grained ultra-low carbon steel

    Takayoshi Kitai, Yasuo Kogo, Shiro Torizuka, S.V.S. Narayana Murty, Kotobu Nagai

    págs. 763-768

    

  • Effect of irradiation temperature in PWR RPV materials and its inclusion in semi-mechanistic model

    F. Sevini, M. Brumovsky, A. Kryukov, F. Gillemot, Andrej Zeman, L. Debarberis, B. Acosta, A. Ballesteros

    págs. 769-773

    

  • Experimental and simulation textures in an asymmetrically skin-passed zinc galvanized sheet

    G. Vincent, F. Zhang, J.J. Fundenberger, C. Esling

    págs. 775-779

    

  • Processing of open cell aluminum foams with tailored porous morphology

    C.S. Shi, J.J. Li, B. Jiang, N.Q. Zhao

    págs. 781-785