International journal of advanced manufacturing technology

• 

  Año 2009, Vol. 44, Número 3-4

  • Effect of tool tilt angle on machining strip width in five-axis flat-end milling of free-form surfaces.

    M.J. Barackchi Fard, H.-Y. Feng

    págs. 211-223

    

  • Investigation of the effects of main roll-forming process parameters on quality for a V-section profile from AHSS.

    J. Paralikas, K. Salonitis, G. Ghryssolouris

    págs. 223-237

    

  • Hybrid forging processes of micro-double gear using micro-forming technology.

    S. Debin, X. Jie, W. Chunju, G. Bin

    págs. 238-243

    

  • Preform and forging process designs based on geometrical features using 2D and 3D FEM simulations.

    J.-J. Sheu, C.-H. Yu

    págs. 244-254

    

  • Numerical analysis for effect of process parameters of low-current micro-PAW on constricted arc.

    P.-q. Xu, S. Yao, J.-p. He, C.-w. Ma, J.-X. Ren

    págs. 255-264

    

  • Effects of heat input on microstructure and mechanical property of Al/Ti joints by rectangular spot laser welding-brazing method.

    Y. Chen, S. Chen, L. Li

    págs. 265-272

    

  • Real-time monitoring and diagnosing in wire-electro discharge machining.

    Eva Portillo Pérez, Margarita Marcos Muñoz, Itziar Cabanes Axpe, Dario Orive Revillas

    págs. 273-282

    

  • Assessment of dynamical properties in EDM process�detecting signature of latent change to deleterious process in advance.

    M. Zhou, F. Han, Yen. Wang, I. Soichiro

    págs. 283-292

    

  • Basic observations in the flat lapping of aluminum and steels using standard abrasives.

    C. Agbaraji, S. Raman

    págs. 293-306

    

  • Some investigations into development of nozzle and suction system for air blast shot peening machine.

    S.B. Mahagaonkar, P.K. Brahmankar, C.Y. Seemikeri

    págs. 306-317

    

  • Optimization of the multi-objective dynamic cell formation problem using a scatter search approach.

    X. Wang, J. Tang, K.-I. Yun

    págs. 318-329

    

  • Propagation of design change between different CAD by using duplicate design procedures.

    C.-F. You, S.-N. Chao

    págs. 330-344

    

  • Balancing�sequencing procedure for a mixed model assembly system in case of finite buffer capacity.

    D. Battini, M. Faccio, A. Persona, F. Sgarbossa

    págs. 345-359

    

  • A study on the new substrate handler for the OLED evaporating process system.

    E. Lee

    págs. 360-371

    

  • Investigation on the conveying velocity of a linear vibratory feeder while handling bulk-sized small parts.

    M. Ramalingam, G.L. Samuel

    págs. 372-382

    

  • Editorial to RAIME 2008.

    M. Siva Kumar

    págs. 383-384

    

  • Evaluation of interface bonding strength of aluminum/silicon carbide.

    G.G. Sozhamannan, S. valasivanandha Prabu

    págs. 385-388

    

  • Workability studies on Al�5%SiC powder metallurgy composite during cold upsetting.

    T. Ramesh, M. Prabhakar, R. Narayanasamy

    págs. 389-398

    

  • Artificial neural network a tool for predicting failure strength of composite tensile coupons using acoustic emission technique.

    S. Rajendraboopathy, T. Sasikumar, K.M. Usha, E.S. Vasudev

    págs. 399-404

    

  • Optimum tolerance synthesis for complex assembly with alternative process selection using Lagrange multiplier method.

    M. Siva Kumar, B. Stalin

    págs. 405-411

    

  • Experimental investigation of tensile creep behavior of polymer nanocomposites.

    V. Devasenapathi, P. Monish, S. Balasivanandha Prabu

    págs. 412-418

    

  • Editorial to RAIME 2008.

    M. Siva Kumar

    pág. 419