International journal of advanced manufacturing technology

• 

  Año 2011, Vol. 55, Número 5-8

  • Composite part design based on numerical simulation of the manufacturing process.

    S: Mouton, Y. Ledoux, D. Teissandier, P. Sébastian

    págs. 421-432

    

  • Model-based robust design for time�pressure fluid dispensing using surrogate modeling.

    Y.-X. Zhao, X.-D. Chen

    págs. 433-446

    

  • Analysis of ceramic shell cracking in stereolithography-based rapid casting of turbine blade.

    X. Chen, D. Li, H. Wu, Y. Tang, L. Zhao

    págs. 447-456

    

  • Chatter prediction in turning process of conical workpieces by using case-based resoning (CBR) method and taguchi design of experiment.

    A.M. Khorasani, A. Jalali Aghchai, A. Khorram

    págs. 457-464

    

  • Evaluation of surface integrity in micro drilling process for nickel-based superalloy.

    M. Imran, P.T. Mativenga, A. Gholinia, P.J. Withers

    págs. 465-476

    

  • Statistical analysis of process parameters in drilling of AL/SICP metal matrix composite.

    G. Tosun

    págs. 477-486

    

  • Multistage machining processes variation propagation analysis based on machining processes weighted network performance.

    Y. Qin, L. Zhao, Y. Yao, D. Xu

    págs. 487-500

    

  • Magnetic abrasive finishing of hardened AISI 52100 steel.

    R.S. Mulik, P.M. Pandey

    págs. 501-516

    

  • Warpage phenomenon of thin-wall injection molding.

    Y.-C. Chiang, H.-C. Cheng, C.-F. Huang, J.-L. Lee, Y. Lin, Y.-K. Shen

    págs. 517-526

    

  • Welding of quenched and tempered steels with high-spin arc narrow gap MAG system.

    D. Min, T. Xin-hua, L. Feng-gui, Y. Shun

    págs. 527-534

    

  • Neural network-based expert systems for predictions of temperature distributions in electron beam welding process.

    D.Y.A. Reddy, D.K. Pratihar

    págs. 535-548

    

  • Manufacturing process modelling using process specification language.

    L. Qiao, S. Kao, Y. Zhang

    págs. 549-564

    

  • Experimental investigation on monitoring interelectrode gap of ECM with six-axis force sensor.

    Y. Lu, K. Liu, D. Zhao

    págs. 565-572

    

  • Selective metallization of polymers using laser induced surface activation (LISA)-characterization and optimization of porous surface topography.

    Y. Zhang, H.N. Hansen, A. De Grave, P.T. Tang, J.S. Nielsen

    págs. 573-580

    

  • Module-based Failure Propagation (MFP) model for FMEA.

    K.W. Noh, H.-B. Jun, J.-H. Lee, G.-B. Lee, H.-W. Suh

    págs. 581-600

    

  • Improving the quality of surface in the polishing process with the magnetic abrasive powder polishing using a high-frequency induction heating source on CNC table.

    S.S. Mirian, A. Fadaei, S.M. Safavi, M. Farzin, M. Salimi

    págs. 601-610

    

  • An accurate and robust method for the honing angle evaluation of cylinder liner surface using machine vision.

    D. Lawrence K., B. Ramamoorthy

    págs. 611-622

    

  • Application of projection pursuit regression to thermal error modeling of a CNC machine tool.

    G. Qianjian, Y. Jianguo

    págs. 623-630

    

  • Experimental studies on optimization of process parameters and finite element analysis of temperature and stress distribution on joining of Al-Al and Al-Al2O3 using ultrasonic welding.

    E. Sooriyamoorthy, S.P. John Henry, P. Kalakkath

    págs. 631-640

    

  • Finite element analysis of countersinking process.

    I. Jallouli, A. Krichen, A. Bougharriou, K. Saï

    págs. 641-648

    

  • "Finite element modeling of the effect of heat input on residual stresses in dissimilar joints".

    E. Ranjbarnodeh, S. Serajzadeh, A. Hosein Kokabi, S. Hanke, Anath Fischer

    págs. 649-656

    

  • Five-axis automated measurement by coordinate measuring machine.

    H.-C. Chang, A.C. Lin

    págs. 657-674

    

  • Tolerance chart balancing with a complete inspection plan taking account of manufacturing and quality costs.

    A. Jeang

    págs. 675-688

    

  • Optimal inspection policy for three-state systems monitored by variable sample size control charts.

    S. Wu

    págs. 689-698

    

  • PCA-based fault isolation and prognosis with application to pump.

    G.R. Halligan, S. Jagannathan

    págs. 699-708

    

  • A new mathematical model for integrating lot sizing, loading, and scheduling decisions in flexible flow shops.

    M. Mohammadi, Niloofar Jafari

    págs. 709-722

    

  • Multi-objective optimization algorithms for flow shop scheduling problem: a review and prospects.

    Y. Sun, C. Zhang, L. Gao, X. Wang

    págs. 723-740

    

  • A GRASP heuristic for the multi-objective permutation flowshop scheduling problem.

    J.C. Arroyo, A.A. de Souza Pereira

    págs. 741-754

    

  • Solving the blocking flow shop scheduling problem by a dynamic multi-swarm particle swarm optimizer.

    J.J. Liang, Q.-K. Pan, C. Tiejun, L. Wang

    págs. 755-762

    

  • A knowledge-based engineering system for assembly sequence planning.

    Y.-Y. Hsu, P.-H. Tai, M.-W. Wang, W.-C. Chen

    págs. 763-782