Applied thermal engineering

• 

  Año 2007, Vol. 27, Número 2

  • Photovoltaic thermal (PV/T) collectors: A review

    Soteris Kalogirou, G.G. Maidment, K. Yiakoumetti, P.G. Charalambous

    págs. 275-286

    

  • Conjugate natural convection in the roof cavity of heavy construction building during summer

    Mohamed A. Mahmoud, Abdullatif Ben-Nakhi

    págs. 287-298

    

  • Studies on a two-stage transcritical carbon dioxide heat pump cycle with flash intercooling

    Neeraj Agrawal, Souvik Bhattacharyya

    págs. 299-305

    

  • Air-side thermal hydraulic performance of offset strip fin aluminum heat exchangers

    Zhijiu Chen, Jiangping Chen, Yimin Zhou, Junqi Dong

    págs. 306-313

    

  • Jojoba methyl ester as a diesel fuel substitute: Preparation and characterization

    S.M.S. Elfeky, O.S.M. Abu-Elyazeed, M.S. Radwan, M.A. Ismail

    págs. 314-322

    

  • Monte Carlo simulations of gas flow and heat transfer in vacuum packaged MEMS devices

    Ru Huang, Moran Wang, Xing Zhang, Hongwei Liu, Jinku Wang, Guoyan Zhang, Huailin Liao

    págs. 323-329

    

  • Transient analysis of modified cuboid solar integrated-collector-storage system

    A. Sridhar, K.S. Reddy

    págs. 330-346

    

  • Supervision of the thermal performance of heat exchanger trains

    M. Madi, P.C. Tonin, C.O.R. Negrão

    págs. 347-357

    

  • Comparative study of mathematical and experimental analysis of spark ignition engine performance used ethanol¿gasoline blend fuel

    H. Serdar Yücesu, Tolga Topgül, Adnan Sozen, Erol Arcaklio&gcaron;lu

    págs. 358-368

    

  • Heat conduction and heat storage characteristics of soils

    H.-F. Zhang, D.-S. Jiao, X.-S. Ge, H. Ye

    págs. 369-373

    

  • Determination of the laminar burning velocities for mixtures of ethanol and air at elevated temperatures

    S.Y. Liao, Q. Cheng, K. Zeng, Z.H. Huang, D.M. Jiang

    págs. 374-380

    

  • Particular characteristics of transcritical CO₂ refrigeration cycle with an ejector

    Wei Lu, Jian-qiang Deng, Tao Lu, Pei-xue Jiang

    págs. 381-388

    

  • High temperature heat exchangers for power plants: Performance of advanced metallic recuperators

    D. Aquaro, M. Pieve

    págs. 389-400

    

  • Comparison on the optimum performances of the irreversible Brayton refrigeration cycles with regeneration and non-regeneration

    Yue Zhang, Jincan Chen, Chih Wu, Jizhou He

    págs. 401-407

    

  • Influence of altitude on the height of blue cone in a premixed flame

    Andrés Adolfo Amell Arrieta

    págs. 408-412

    

  • Optimization of multistage flash desalination process by using a two-level factorial design

    J. Abdo, S.A. Abdul-Wahab

    págs. 413-421

    

  • Numerical simulation of fluid bed drying based on two-fluid model and experimental validation

    M. Saffar-Avval, H. Basirat Tabrizi, M.R. Assari

    págs. 422-429

    

  • A novel rainwater¿ground source heat pump ¿ Measurement and simulation

    Saffa B. Riffat, Guohui Gan, C.S.A. Chong

    págs. 430-441

    

  • A theoretical study on area compensation for non-directly-south-facing solar collectors

    Sheng-Xian Wei, Xi-Zheng Zhou, Li Ming

    págs. 442-449

    

  • A thermo-economical optimization of a domestic solar heating plant with seasonal storage

    A. Ucar, M. Inalli

    págs. 450-456

    

  • Concept on thermoeconomic evaluation of steam turbines

    L. Correas-Uson, J. Kubiak-Szyszka, A. Zaleta-Aguilar, F.Z. Sierra-Espinosa

    págs. 457-466

    

  • Dynamic modeling of steam power cycles.: Part I¿Modeling paradigm and validation

    P. Colonna, H. van Putten

    págs. 467-480

    

  • Exergy analysis of an ejector-absorption heat transformer using artificial neural network approach

    Adnan Sözen, Erol Arcaklio&gcaron;lu

    págs. 481-491

    

  • Models for transient conduction in a flat plate subjected to a variable heat flux

    Souad Harmand, Ali Grine, Jean Yves Desmons

    págs. 492-500

    

  • Simultaneously estimating the contact heat and mass transfer coefficients in a double-layer hollow cylinder with interface resistance

    Yu-Ching Yang

    págs. 501-508

    

  • Thermal¿hydraulic analysis of a steam boiler with rifled evaporating tubes

    Dragan R. Tucakovic, Aleksandar Jovovic, Titoslav Zivanovic, Vladan B. Ivanovi¿, Vladimir D. Stevanovic

    págs. 509-519

    

  • Prediction of evaporation losses in evaporative fluid coolers

    Syed M. Zubair, Bilal Ahmed Qureshi

    págs. 520-527

    

  • An empirical validation of modeling solar gain through a glazing unit with external and internal shading screens

    H. Manz, G.M. Maxwell, P.G. Loutzenhiser, P.A. Strachan, C. Felsmann

    págs. 528-538

    

  • Parametric study on the performance of a heat exchanger with corrugated louvered fins

    Zhi-jiu Chen, Jiang-ping Chen, Zhao-gang Qi

    págs. 539-544

    

  • Prediction of infiltration rates through an automatic door

    Sui Lin, Tzu-Fang Chen, Georgios H. Vatistas, Dekang Chen

    págs. 545-550