International journal of advanced manufacturing technology

• 

  Año 2010, Vol. 46, Número 1-4

  • Application of a genetic-fuzzy system to diesel engine pressure modeling.

    L. Radziszewski, M. Kekkez

    págs. 1-10

    

  • A computer-aided design system for foot-feature-based shoe last customization.

    S. Xiong, J. Zhao, Z. Jiang, M. Dong

    págs. 11-20

    

  • Simulation of pre-solving active forces of a 4SPS+SPR parallel machine tool in normal machining a 3D free-form surface.

    Y. Lu, J. Xu, J. Yu

    págs. 21-30

    

  • A rule-based approach to predict forging volume for cost estimation during product design.

    D.T. Masel, W.A. II Young, R.P. Judd

    págs. 31-42

    

  • Study on mechanism of chip formation during high-speed milling of alloy cast iron.

    Y. Yang, J.F. Li

    págs. 43-50

    

  • Desktop 3-axis parallel kinematic milling machine.

    M. Glavonjic, D. Milutinovic, S. Zivanovic, Z. Dimic, V. Kvrgic

    págs. 51-60

    

  • Permutation entropy based real-time chatter detection using audio signal in turning process.

    U. Nair, B.M. Krishna, V.N.N. Namboothiri, V.P.N. Nampoori

    págs. 61-68

    

  • Tool wear and cutting forces variation in high-speed end-milling Ti-6AI-4V alloy.

    S. Zhang, J.F. Li, J. Sun, F. Jiang

    págs. 69-78

    

  • Prediction of mechanistic cutting force coefficients using ALE formulation.

    O.B. Adetoro, P. H. Wen

    págs. 79-90

    

  • The actual geometry of the cutting tool involved in machining.

    Z.Y. Shi, Z.Q. Liu

    págs. 91-100

    

  • Modelling of kinetic friction in V-bending of ultra-high-Strenght steel sheets.

    M. Ramezani, Z. Mohd Ripin, R. Ahmad

    págs. 101-110

    

  • Deformation evolution mechanism during hydro-bulging of tailor-welded tube with dissimilar thickness.

    G. Liu, G.N. Chu, S.J. Yuan, X.S. Wang

    págs. 111-116

    

  • Method for graphically evaluating the Workpiece's contour error in non-circular grinding process.

    J. Huan, W. Ma

    págs. 117-122

    

  • Efficient dressing of the wheel in ELID grinding by controllable voltage with force feed back.

    T. Saleh, I. Bishwas, M. Rahman

    págs. 123-130

    

  • Manufacturing of comlex-shaped ceramic components by micropowder injection molding.

    V. Piotter, T. Mueller

    págs. 131-134

    

  • Online measurement and correction of post-weld shift in laser welding packaging for laser diodes.

    Y. Wu, H. Yang, S. Li

    págs. 135-142

    

  • Modeling of flow stress in orthogonal micro-cutting process based on strain gradient plasticity theory.

    J. Wu, Z. Liu

    págs. 143-150

    

  • Cross-section segmentation for improving the shape accuracy of microstructure array in projection microstereolithography.

    I.B. Park, Y.M. Ha, S.H. Lee

    págs. 151-162

    

  • An automated procedure for material removal rate prediction in laser surface mocromanufacturing.

    L. Orazi, G. Cuccolini, A. Fortunato, G. Tani

    págs. 163-172

    

  • Studies of microstructures made of Zn-Al alloys using microcasting.

    C. Yang, B.S. Li, M.X. Ren, H.Z. Fu

    págs. 173-178

    

  • Tool fabrication system for micro/nano milling-function analysis and design of a six-axis Wire EDM machine.

    X. Cheng, Z.G. Wang, S. Kobayashi, K. Nakamoto, K. Yamazaki

    págs. 179-190

    

  • Desulfurization process using Takagi-Sugeno-Kang fuzzy modeling.

    B. Rezaee

    págs. 191-198

    

  • Erratum to: Desulfurization process using Takagi-Sugeno-Kang fuzzy modeling.

    B. Rezaee, M.H. Fazel Zarandi, I.B. Turksen

    págs. 199-200

    

  • Effects of build orientation on tensile strength for stereolithography-manufactured ASTM D-638 type I specimens.

    R. Quintana, J.-W. Choi, K. Puebla, R. Wicker

    págs. 201-217

    

  • An integrated modeling method of unified tolerance representation for mechanical product.

    K. Zhang, Y. Li, S. Tang

    págs. 217-226

    

  • Automated inspection of aircraft parts using a modified ICP algorithm.

    S. Ravishankar, H.N.V. Dutt, B. Gurumoorthy

    págs. 227-236

    

  • Data sampling and processing for contact free-form surface scan-tracking measurement.

    Z.-Y. Jia, X.-H. Lu, Whye-Teong Ang, J.-Y. Yang

    págs. 237-252

    

  • Modeling and analysis of effective ways for improving the reliability of second-hand products sold with warranty.

    M. Saidi-Mehrabad, R. Noorossana, M. Shafiee

    págs. 253-266

    

  • A novel depth-from-hybrid-focus method for surface morphology with depth discontinuity.

    G.-B. Kim

    págs. 267-274

    

  • Noncontact roughness measurement of turned parts using machine vision.

    H.H. Shahabi, M.M. Ratnam

    págs. 275-284